Windows Update cannot currently check for updates, because updates on this computer are controlled by your system administrator
PS. I have approved all updates but only one server got the updates, the other 8 servers have not updated and when you look at the wsus console the the 8 servers are sitting on 96% installed.
Zakaria Khan
Hi,
The problem I have is, the downstream servers cannot synchronize to their upstream server. Every time gets the synchronization with 0% the error 'OutOfMemoryException'…
Nevertheless the same problem exists with the version 3.2.7600.226 too.
The Automatic Approvals is activated for several computer groups, which during this process occurred no error.
I assume the failure occured as soon as I approved many updates to all 60 computer groups.
We have one upstream w2k8 server and 22 downstream w2k3 server as replica.
All servers are locating in different geographical locations and have this problem.
The master upstream server has no synchronization problem to the MS update server.
These steps I have already done without any effect.
wsusutil reset
Dbcc checkdb
Reindexed DB
Reduced declined updates
Restarted IIS, BIT, SQL server, wsus service
Upstream or master server 2008 sp2 x64:
RAM 8GB
Wsus version: 3.2.7600.251
All Updates: 5459
Approved: 5459
Unapproved: 0
Declined: 0
Computer groups: 60
Internal database
Downstream server 2003 R2 sp2 x86:
RAM 4GB
Wsus version: 3.2.7600.251
All Updates: 5459
Approved: 5459
Unapproved: 0
Declined: 0
Internal database
2012-12-30 16:18:39.967 UTC Info w3wp.10 ThreadEntry ISAPIRuntime.ProcessRequest
2012-12-30 16:18:39.967 UTC Change w3wp.10 AdminDataAccess.StartSubscriptionManually Synchronization manually started
2012-12-30 16:18:40.811 UTC Info w3wp.22 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:40.827 UTC Info w3wp.23 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:40.827 UTC Info w3wp.21 SusEventDispatcher.RegisterEventHandler RegisterEventHandler called for NotificationEventName: ConfigurationChange
2012-12-30 16:18:43.108 UTC Info w3wp.17 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:43.108 UTC Info w3wp.13 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:43.108 UTC Info w3wp.38 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:43.124 UTC Info w3wp.37 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:43.124 UTC Info w3wp.38 RevisionIdCacheChangeNotificationDispatcher.InternalEventHandler Get event ConfigurationChange from dispatchmanager
2012-12-30 16:18:43.608 UTC Info WsusService.7 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: CatalogSyncAgent, EventInfo:
2012-12-30 16:18:43.608 UTC Info WsusService.16 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: CatalogSyncAgent
2012-12-30 16:18:43.608 UTC Info WsusService.7 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:43.608 UTC Info WsusService.16 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:43.624 UTC Info WsusService.28 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:43.624 UTC Info WsusService.28 EventLogEventReporter.ReportEvent EventId=382,Type=Information,Category=Synchronization,Message=A manual synchronization was started.
2012-12-30 16:18:43.655 UTC Info WsusService.16 WebServiceCommunicationHelper.ConfigChangedHandler Update server configuration has changed. Reporting service: stats.update.microsoft.com, SyncFromMU: False
2012-12-30 16:18:43.671 UTC Info WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol Server ID is da9aa6fb-ea7f-4929-862a-7d6e9eae1212
2012-12-30 16:18:44.530 UTC Info w3wp.25 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:44.546 UTC Info w3wp.36 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:44.546 UTC Info w3wp.36 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:44.546 UTC Info w3wp.36 ChangeNotificationDispatcher.InternalEventHandler Get event ConfigurationChange from dispatchmanager
2012-12-30 16:18:44.546 UTC Info w3wp.26 Client.OnConfigurationChange Creating a new ClientImplementation because the DB configuration changed
2012-12-30 16:18:44.546 UTC Info w3wp.26 ClientImplementation..ctor Initializing ClientWebService ProcessID = 3700, Process Start Time = 12/30/2012 1:54:47 PM, Product Version = 3.2.7600.251
2012-12-30 16:18:45.827 UTC Info w3wp.22 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:45.842 UTC Info w3wp.18 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:45.842 UTC Info w3wp.18 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:45.842 UTC Info w3wp.21 SusEventDispatcher.RegisterEventHandler RegisterEventHandler called for NotificationEventName: ConfigurationChange
2012-12-30 16:18:46.202 UTC Change WsusService.28 AdminDataAccess.ExecuteSPSetConfiguration WSUS configuration has been changed
2012-12-30 16:18:46.202 UTC Info WsusService.28 CatalogSyncAgentCore.SyncConfigUpdatesFromUSS Category Sync: Filter: <filter SyncAnchor="716667,2012-12-30 16:10:03.702" GetConfig="1"></filter>
2012-12-30 16:18:46.764 UTC Info WsusService.28 CatalogSyncAgentCore.SyncConfigUpdatesFromUSS Need 0 config updates, 0 are new
2012-12-30 16:18:46.764 UTC Info WsusService.28 CatalogSyncAgentCore.SyncConfigUpdatesFromUSS Category Sync: New Config Anchor: 716667,2012-12-30 16:19:50.501
2012-12-30 16:18:46.796 UTC Info WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol Catalog Sync: Filter: <filter SyncAnchor="0,2000-01-01 00:00:01.000"><languageList><language delta="1" value="1033"> </languageList></filter>
2012-12-30 16:18:48.124 UTC Info w3wp.17 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:48.124 UTC Info w3wp.13 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:48.139 UTC Info w3wp.40 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:48.139 UTC Info w3wp.40 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:48.139 UTC Info w3wp.41 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:48.139 UTC Info w3wp.40 RevisionIdCacheChangeNotificationDispatcher.InternalEventHandler Get event ConfigurationChange from dispatchmanager
2012-12-30 16:18:48.139 UTC Info w3wp.41 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:48.624 UTC Info WsusService.7 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:48.624 UTC Info WsusService.24 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:48.655 UTC Info WsusService.24 WebServiceCommunicationHelper.ConfigChangedHandler Update server configuration has changed. Reporting service: stats.update.microsoft.com, SyncFromMU: False
2012-12-30 16:18:49.546 UTC Info w3wp.25 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:49.546 UTC Info w3wp.42 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:49.561 UTC Info w3wp.42 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:49.561 UTC Info w3wp.42 ChangeNotificationDispatcher.InternalEventHandler Get event ConfigurationChange from dispatchmanager
2012-12-30 16:18:49.561 UTC Info w3wp.26 Client.OnConfigurationChange Creating a new ClientImplementation because the DB configuration changed
2012-12-30 16:18:49.561 UTC Info w3wp.26 ClientImplementation..ctor Initializing ClientWebService ProcessID = 3700, Process Start Time = 12/30/2012 1:54:47 PM, Product Version = 3.2.7600.251
2012-12-30 16:18:50.842 UTC Info w3wp.22 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: ConfigurationChange, EventInfo: ConfigurationChange
2012-12-30 16:18:50.858 UTC Info w3wp.43 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:18:50.858 UTC Info w3wp.43 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: ConfigurationChange
2012-12-30 16:18:50.858 UTC Info w3wp.21 SusEventDispatcher.RegisterEventHandler RegisterEventHandler called for NotificationEventName: ConfigurationChange
2012-12-30 16:18:54.936 UTC Warning w3wp.7 SoapUtilities.CreateException ThrowException: actor = http://<server>/ClientWebService/client.asmx, ID=8e430128-1b6b-4fb5-951c-de5424619d33, ErrorCode=ConfigChanged, Message=, Client=415558c3-b27e-4bef-a596-7160f44e2ad7
2012-12-30 16:19:07.077 UTC Info WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol Catalog Sync: New Anchor: 716667,2012-12-30 16:19:51.610
2012-12-30 16:19:07.561 UTC Info WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol Need 48297 updates, 0 are new
2012-12-30 16:19:07.561 UTC Info WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol Total actually inserted updates: 0
2012-12-30 16:19:07.561 UTC Info WsusService.28 CatalogSyncAgentCore.ReplicaSync DeploymentSync: starting full sync
2012-12-30 16:19:07.561 UTC Info WsusService.28 CatalogSyncAgentCore.ReplicaSync DeploymentSync: anchors: "" to "716667,2012-12-30 16:19:51.610"
2012-12-30 16:19:10.358 UTC Warning w3wp.5 SoapUtilities.CreateException ThrowException: actor = http://<server>/ClientWebService/client.asmx, ID=c2b65e86-03c2-47c1-ab45-7e1d592d3915, ErrorCode=ConfigChanged, Message=, Client=5ddd6843-b615-44c4-92a8-ff5761e6fb79
2012-12-30 16:19:18.139 UTC Info w3wp.8 ThreadEntry _TimerCallback.PerformTimerCallback
2012-12-30 16:19:18.139 UTC Info w3wp.8 ServerImplementation.UpdateCache Database change occured; check if we need to update cache.
2012-12-30 16:21:23.499 UTC Warning w3wp.1 SoapUtilities.CreateException ThrowException: actor = http://<server>/ReportingWebService/ReportingWebService.asmx, ID=b59fe272-0909-42c6-81f9-de4d35696f57, ErrorCode=ConfigChanged, Message=,
Client=d2b2c050-2ebf-4d18-a5c7-540aaa77f929
2012-12-30 16:21:23.514 UTC Error w3wp.1 WebService.ReportEventBatch Exception occured in ReportEventBatch: Fault occurred
at Microsoft.UpdateServices.Internal.Reporting.WebService.ReportEventBatch(Cookie cookie, DateTime clientTime, ReportingEvent[] eventBatch)
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()
at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
2012-12-30 16:22:27.608 UTC Warning w3wp.7 SoapUtilities.CreateException ThrowException: actor = http://<server>/ClientWebService/client.asmx, ID=a0f46442-1628-4693-840c-6ab9fe923558, ErrorCode=ConfigChanged, Message=, Client=d2b2c050-2ebf-4d18-a5c7-540aaa77f929
2012-12-30 16:22:33.233 UTC Error WsusService.28 ServerSyncCompressionProxy.GetWebResponse GetWebResponse exception:
at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetDeployments(Cookie cookie, String deploymentAnchor, String syncAnchor)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.WebserviceGetDeployments(String anchorMin, String anchorMax)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ReplicaSync()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.CatalogSyncThreadProcess()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2012-12-30 16:22:33.233 UTC Error WsusService.28 WebServiceCommunicationHelper.ProcessWebServiceProxyException ProcessWebServiceProxyException found Exception was an Enexpected Type. Action: No Retry, Fail. Exception Details: System.OutOfMemoryException:
Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetDeployments(Cookie cookie, String deploymentAnchor, String syncAnchor)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.WebserviceGetDeployments(String anchorMin, String anchorMax)
at Microsoft.UpdateServices.Internal.WebServiceCommunicationHelper.ProcessWebServiceProxyException(SoapHttpClientProtocol& webServiceObject, Exception exceptionInfo)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.WebserviceGetDeployments(String anchorMin, String anchorMax)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ReplicaSync()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.CatalogSyncThreadProcess()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2012-12-30 16:22:33.233 UTC Error WsusService.28 CatalogSyncAgentCore.ExecuteSyncProtocol System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Microsoft.UpdateServices.ServerSync.ServerSyncCompressionProxy.GetWebResponse(WebRequest webRequest)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.UpdateServices.ServerSyncWebServices.ServerSync.ServerSyncProxy.GetDeployments(Cookie cookie, String deploymentAnchor, String syncAnchor)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.WebserviceGetDeployments(String anchorMin, String anchorMax)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ReplicaSync()
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.CatalogSyncThreadProcess()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2012-12-30 16:22:33.233 UTC Info WsusService.28 CatalogSyncAgentCore.UpdateSyncResultAndGenerateReportingEvent CatalogSyncThreadProcess: report subscription Undefined error class or Success
2012-12-30 16:22:33.233 UTC Info WsusService.28 EventLogEventReporter.ReportEvent EventId=386,Type=Error,Category=Synchronization,Message=Synchronization failed. Reason: Exception of type 'System.OutOfMemoryException' was thrown..
2012-12-30 16:22:33.249 UTC Info WsusService.17 CatalogSyncAgent.WaitUntilSyncFinishedOrCancelled Agent signalled done.
2012-12-30 16:22:33.249 UTC Info WsusService.17 CatalogSyncAgent.SetSubscriptionStateWithRetry Firing event SyncFailToStart...
2012-12-30 16:22:33.249 UTC Info WsusService.17 CatalogSyncAgent.WakeUpWorkerThreadProc Found no more jobs. CatalogSyncAgent quits but will run rollup before terminating ...
2012-12-30 16:22:33.264 UTC Info WsusService.17 CatalogSyncAgent.UpdateServerHealthStatusBasedOnError ServerHealth: Updating Server Health for Component: CatalogSyncAgent, Marking as Not Running
2012-12-30 16:22:34.577 UTC Info WsusService.7 SusEventDispatcher.TriggerEvent TriggerEvent called for NotificationEventName: RollupAgent, EventInfo:
2012-12-30 16:22:34.577 UTC Info WsusService.27 ThreadEntry ThreadHelper.ThreadStart
2012-12-30 16:22:34.577 UTC Info WsusService.27 SusEventDispatcher.DispatchManagerWorkerThreadProc DispatchManager Worker Thread Processing NotificationEvent: RollupAgent
I hope you could help me.
Thanks,
kailar
Hi,
for this issue I have already found the thread "http://social.technet.microsoft.com/Forums/en-US/winserverwsus/thread/2408f2ab-06a8-497e-bf55-a6a0b88d2d15" in this forum but the answer those not corresponds to my case.
My there replica servers which I rebuild new cannot synchronize with the upstream server successfully. According to the logfile there are four updates which are causing this problem. My other replica servers have no problem with these four updates.
The four updates can be found on the upstream server but not on the replica downstream servers.
Upstream server: 3.2.7600.251
Downstream replica servers: 3.2.7600.251
The there downstream replica servers are been rebuild new.
Declining these updates on the upstream server did not help.
2013-01-27 13:08:43.561 UTC Error WsusService.12 CatalogSyncAgentCore.ExecuteSyncProtocol 4 update(s) could not be imported into the local db even with retry
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.ExecuteSyncProtocol(Boolean allowRedirect)
at Microsoft.UpdateServices.ServerSync.CatalogSyncAgentCore.CatalogSyncThreadProcess()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2013-01-27 13:08:43.561 UTC Error WsusService.12 CatalogSyncAgentCore.ExecuteSyncProtocol Bad Update Revision #0: 78b86d45-2b71-447d-ae7b-cedf21e63416/103
..
2013-01-27 13:08:43.561 UTC Error WsusService.12 CatalogSyncAgentCore.ExecuteSyncProtocol Bad Update Revision #1: f3a49632-6c6f-4bed-8698-81490e759510/103
…
2013-01-27 13:08:43.561 UTC Error WsusService.12 CatalogSyncAgentCore.ExecuteSyncProtocol Bad Update Revision #2: 6f605520-7281-49ba-821b-8e87610f8aaa/103
…
2013-01-27 13:08:43.577 UTC Error WsusService.12 CatalogSyncAgentCore.ExecuteSyncProtocol Bad Update Revision #3: 5092f51e-64b8-4ad4-a169-df0843cc0e4d/103
…
2013-01-27 13:10:56.217 UTC Info WsusService.12 EventLogEventReporter.ReportEvent EventId=386,Type=Error,Category=Synchronization,Message=Synchronization failed. Reason: System.Data.SqlClient.SqlException: Cannot insert the value NULL into
column 'RevisionID', table '@BundleAll'; column does not allow nulls. INSERT fails.
Error loading information from upd:BundledUpdates/upd:UpdateIdentity for update 78B86D45-2B71-447D-AE7B-CEDF21E63416\103. Some update revisions in bundle information are not already present in the database.
The statement has been terminated.
Thanks for any help.
kailar
Hi,
WSUS 3 SP2 on Windows 2003 R2 Standard Edition SP2. Security Update for Windows XP (KB2753842) is showing up twice in WSUS. From what I been reading online it appears MS might have botched the patch and then re-released it. When the patch first came out
it was assigned to my test group in WSUS for testing prior to a larger roll out. Then the re-release of patch came out. So now its showing up twice in the console. I went ahead and declined the expired update and approved the revised update for my test group.
I then ran the clean up wizard and it did not delete the expired update which had been declined. Apparently I am not following the correct procedure. Can someone help?
I have seen different flavors of this question asked and answered but none of them seem to quite fit what I am looking to accomplish. I manage a network of approximately 700 windows xp point of sale machines. They all point to a WSUS 3.0 server. I currently have updates being installed across these 700 machines on various nights of the week in hopes of avoiding a nightmare situation where patches break our application and then we would not be able to sell any product. I have the WSUS server configured to automatically install anything critical and security. Also, each POS is configured via group policy.
About a month or so ago we had this sort of situation happen. Long story short, a microsoft patch was released (2661254) that broke one of our applications because of certificate length. As a result, I was ordered to disable the windows update server until we had a better method to test prior to deployment of patches.
So my question is - is this possible with WSUS only?? For example, it makes sense to me to have a test bed of locations, maybe 25 endpoints that patches could be deployed to, maybe the days after each patch tuesday. Once we were sure that none of these updates were going to harm our application, we could then deploy the the rest of our organization.
At first look, I thought of looking at the GPO settings for configure automatic updates - but I don't see how I can configure to install, for example, every 15 days. I then noticed that I cannot make the detection frequency more than 22 hours.
How should I accomplish this? What are the best practices? Should I start looking at other products??
Thanks
sb
We did not run the server cleanup wizard from long time. So I am sure it will take lot of time to complete. The problem is, when I try to use option 4 or 1 it got disconnected for every 10 mins exactly. I am trying one option at a time. I did 2, 3 and 5 options without any issue. Is there is some where specified it should disconnect after 10 mins so that I can change it to long time. I am sure no other task is running on DB. I tried even Powershall but no luck.
Hello,
WSUS Server is installed on Windows 2008 R2 Server and WSUS DB is installed also on separate Windows 2008 R2 Server.
on database side, there is installed SQL Server 2008 R2 Standard Edition.. and there is Named Instance configured (SQL01\WSUS).
i also prepared another SQL server which is in cluster, and there is installed SQL Server 2008 R2 SP2 Enterprise Edition (OS is windows server 2008 R2).
so i found an article related to this issue and i was following to that steps
http://social.technet.microsoft.com/forums/en-US/winserverwsus/thread/7e5c7139-1e33-4f4b-a477-db77c43ee09c
1.Install SQL Server 2005 (with the Server and Client Tools option) and SQL Server 2005 Service Pack 1 or higher on
your new server.
2.Stop the IIS Admin service and the Update Services service:
in Services snapin.
•Right-click IIS Admin Service, and then click Stop.
•Right-click Update Services, and then click Stop.
3.Detach the WSUS database (SUSDB) from the orginal SQL server.
sqlcmd -S np:\\.\pipe\MSSQL$MICROSOFT##SSEE\sql\query
use master
alter database SUSDB set single_user with rollback immediate
go
sp_detach_db ‘SUSDB’
go
when i m launching sqlcmd syntax in command promt it is not executed
C:\Users\adm>sqlcmd -S sql01\wsusany ideas?
Costa Curta
On Windows Server 2008 R2 Enterprise, I added the WSUS role and after going through some documentation, I was annoyed to see this:
The WSUS 3.0 administration console has moved from a Web-based console to a plug-in to the Microsoft Management Console version 3.0. The new user interface provides the following features:
Has anyone found an open source solution to replace this functionality?
hello
the config :
windows server 2012, sql server 2012, sccm 2012 sp1
we r trying to set up and config sccm 2012 sp1 on a windows server 2012. sql server 2012 is also on the same server windows 2012.
we still have issues displayed on Config manager console. WSUS (built in windows server 2012) doesnt not work
it failed to update it, here is the message displayed in system status / component status of config manager console :
``WSUS Synchronization failed.
Message: WSUS update source not found on site CPI. Please refer to WCM.log for configuration error details..
Source: getSiteUpdateSource.
The operating system reported error 2147500037: Error not specified``
port 8530 and 8531 is ok, we dont use ssl, we have a remote wsus (we dont use microsoft update web site)
any idea ??
thank you
I am using WSUS 3.0 SP2 on my domain and a week ago I changed the time on my GPO to update the clients. After that the clients stopped updating and rebooting like they were doing before. I haven't modified anything else in my GPO other than the time the clients are to install the updates and they worked fine before. The log from one of the clients is below. The icon in the system tray shows up that updates are available and I can see in the event logs that the client downloaded the updates. On this client I tried de-registering the dll's and re-registering them. I checked all my settings in GPO and toggled them but no luck.
2013-01-2913:26:32:6617843a8AUTriggering AU detection through DetectNow APIHi,
I have WSUS 3.2.7600.266 and about 4 servers (Windows 2008 R2) in the DMZ in a Workgroup.
Does anyone know how I can configure the systems so the Windows servers will pull updates from the WSUS server in the DMZ?
I hae tried this ->http://community.spiceworks.com/how_to/show/2267-deploy-wsus-to-clients-without-ad-domain-gp-using-the-registry
I tried the script and it failed, it is for Windows Registry Editor Version 5.00. I need to apply it to a Win 2008R2 server w/ ver 6.1 registry editor.
Anyone suggestions?
Thanks!
Wave~Chaser
I have setup SCCM 2012 Sp1 on Server 2012 with WSUS using the internal database. When I sync updates in SCCM, I get the following error on some of the updates
"Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow"
"Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
"STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=SiteServerxx.COM.AU SITE=MEL PID=2260 TID=2716 GMTDATE=Sat Jan 26 03:56:15.496 2013 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates" ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0"
Not all of the updates are showing this error. Also folders are being created in the WsusContent folder but they all seem to be empty.
Hi Everyone,
I have added the WSUS role to a new 2008 R2 machine, when i try to synch to windows update through the initial config wizard i get the below error msg
I doubt it's a proxy issue as i have the another wsus running with the same proxy settings with no problems (proxy server and credentials)
- Both servers can access the internet, and both have the same IE proxy settings.
- Both servers are running with the same WSusCertServer Service (Local System Account)
Any ideas? Thanks in advanced!
Hi
I'm trying to set up WSUS in our environment and need this clarifying.
I've enabled WOL on all our desktop clients and they do wake from a cold state S5 using 3rd party class room management (I haven't got as far as setting up SCCM WOL yet but that is to follow).
I've also set up an Automatic Windows Update GPO which:
I need to know that the power management side of things will turn the machine on from a S5 state. If not, why not!?
Also I'll need an alternative solution. Ideally a way of turning on all the desktops before the 7am start time using either a scheduled task or automatically sent wake up packet. Would it maybe make more sense to configure SCCM first so it could wake the machines but my understanding is that it'll only send wake up packets when deploying software? I've also read that broadcasting such packets requires unicast as they will crossing multiple subnets and these don't work with S5.
Is it worth setting up a scheduled task on the desktops to boot before 7am or does the command have to come through the nic to automatically boot. I did read somewhere about maybe setting the BIOS to wake, is that a better option? I hope not as it would require me changing all the BIOS settings manually unless anyone has any bright ideas on sorting that as well.
Any assisstance with this topic would be greatly appreciated, even if it's just pointing me to the right thread.
Environment: Windows 7 HP 3130 sff clients (BIOS revision 6.16) with Realtek PCIe GBE Family Controller nics , 2008 servers, Update service version 3.2, SCCM 2007 v 4
Regards
Peter Simmons
MCP, VCP.
Hi,
I have setup WSUS on Windows 2008 R2 Ent., using IIS7. I would like to secure the deployment by configuring SSL. From the research I have done it appears that I need to:
are these the only configs that would be required? do they need to be done in any specific order? Please let me know if I need to supply any additional information.
Thanks.
Hi all,
I have a WSUS 3.0 SP2 setup on a 2003 domain with mixed Windows 7 and Windows XP machines, all 32-bit. I've been applying updates using the supersedence column sort so that only the latest and most comprehensive packages are applied. I've approved all packages that have the blue square on top and the ones which have no supersedence icon, and all have been correctly applied.
However there are a few superseded Office packages that are still reported as needed for my computers, some with the blue square on the middle and some with the blue square on the bottom. For example:
- KB2553455 (bottom square), which has been superseded by KB2597091
- KB2597091 (middle square), which has been superseded by KB2687509 and KB2598289
When I go to the details of KB2687509 and KB2598289, both report as Not Applicable for any of my computers, so they aren't supposed to be installed on the computers.
What should I do to sort this out?
Thanks
Gustavo
I've been all over the forums on this but have yet to find a solution. I have a downstream WSUS server running WSUS version 3.2.7600.226 with 64 clients connected (both Win 7 and Win XP).The server is not in a load balanced cluster, but clients were redirected to another server via Group Policy before this server was in place.
I was getting local WSUS error logs like this:
2013-01-24 04:00:06:727 596 150c PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://10.75.77.8/ClientWebService/client.asmx
2013-01-24 04:00:06:773 596 150c PT WARNING: Cached cookie has expired or new PID is available
2013-01-24 04:00:06:773 596 150c PT Initializing simple targeting cookie, clientId = ff2ef028-3216-4ba5-ba37-a0e582f574be, target group = WSUS-BH-283, DNS name = smcd02.corp.uhsinc.biz
2013-01-24 04:00:06:773 596 150c PT Server URL = http://10.75.77.8/SimpleAuthWebService/SimpleAuth.asmx
2013-01-24 04:00:06:805 596 150c PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-01-24 04:00:06:805 596 150c PT WARNING: SOAP Fault: 0x00012c
2013-01-24 04:00:06:805 596 150c PT WARNING: faultstring:Fault occurred
2013-01-24 04:00:06:805 596 150c PT WARNING: ErrorCode:ConfigChanged(2)
2013-01-24 04:00:06:805 596 150c PT WARNING: Message:(null)
2013-01-24 04:00:06:805 596 150c PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-01-24 04:00:06:805 596 150c PT WARNING: ID:32fed988-78fb-4734-9930-475c76b4d418
2013-01-24 04:00:07:023 596 150c PT WARNING: Cached cookie has expired or new PID is available
2013-01-24 04:00:07:023 596 150c PT Initializing simple targeting cookie, clientId = ff2ef028-3216-4ba5-ba37-a0e582f574be, target group = WSUS-BH-283, DNS name = smcd02.corp.uhsinc.bizWhen I deleted the WSUS object from the WSUS console and reset the SUS ID on the local PC, I'd then get this on the local log:
2013-01-25 07:42:23:258 1164 fe4 AU # Detection frequency: 6
2013-01-25 07:42:23:258 1164 fe4 AU # Target group: WSUS-BH-283
2013-01-25 07:42:23:258 1164 fe4 AU # Approval type: Scheduled (Policy)
2013-01-25 07:42:23:258 1164 fe4 AU # Scheduled install day/time: Every day at 18:00
2013-01-25 07:42:23:258 1164 fe4 AU # Auto-install minor updates: Yes (Policy)
2013-01-25 07:42:23:258 1164 fe4 AU # Will interact with non-admins (Non-admins are elevated (Policy))
2013-01-25 07:42:23:258 1164 fe4 AU Setting AU scheduled install time to 2013-01-26 02:00:00
2013-01-25 07:42:23:258 1164 fe4 AU Initializing featured updates
2013-01-25 07:42:23:258 1164 fe4 AU Found 0 cached featured updates
2013-01-25 07:42:23:258 1164 fe4 AU WARNING: ISusInternal::CanInstallNow failed, error = 0x80070005
2013-01-25 07:42:23:258 1164 fe4 AU AU finished delayed initialization
2013-01-25 07:42:23:258 1164 fe4 AU Triggering AU detection through DetectNow API
2013-01-25 07:42:23:258 1164 fe4 AU Triggering Online detection (non-interactive)
2013-01-25 07:42:23:289 1164 1d8 Agent Created new random SusClientId efad077d-cdf7-409e-bf40-d623ac06bf69. Old Id: none.
Thus far I have tried attacking this from the client and server angles:
To recap from the client side I've done:
- I have stopped the AU service, deleted the C:\Windows\SoftwareDistribution folder then restarted the AU service (which recreated the SoftwareDistribution folder) and ran wuauclt /resetauthorization /detectnow
- I have stopped the
Windows Management Instrumentation Service, renamed the REPOSITORY to REPOSITORY.OLD in
C:\Windows\system32\wbem and restarted the service which recreated the REPOSITORY folder
- I have stopped the AU service, deleted the
SUSID from the registry:
REG DELETE "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v AccountDomainSid /f
REG DELETE "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v PingID /f
Reg Delete "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v SusClientId /f
Reg Delete "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsUpdate" /v SusClientIdValidation /f
- then restarted AU service and
ran wuauclt /resetauthorization /detectnow
- as some blogs indicated a change in local permissions on the C:\ drive I compared the local C:\ drive permissions with a working PC connected to a different WSUS server and saw no difference
- some blogs indicated a services permission issue using a custom account
- Automatic Update Service, Background Intelligent Transfer Service were both using the Local System account
- dependent service (on the XP box) Remote Procedure Call was using Network Service account
Clients could then always talk to the WSUS server, update their "Reported" status, and get metadata approvals, but would never download updates (would stay at status "Not Installed" and never move to "Downloaded")
As some blogs indicated an issue with IIS, from the server side:
- I uninstalled the IIS role, all dependent roles and services and WSUS
- I removed all files and local DB's during the WSUS uninstallation
- Rebooted, then again after the IIS removal was complete after that reboot
- reinstalled IIS and WSUS, re-setup the server as a downstream (no SSL no proxy - as before)
Now all clients (Win 7 and Win XP) hit the WSUS server and hang indefinitely in a "Not Yet Reported" status unless I run a wuauclt /resetauthorization /detectnow command where they will at least register a status, but when they do, same issue as before. Metadata on approvals shows ok, but client does not download any updates.
Wanting to verify the PCs needed updates so while I was on one I had it hit Windows Update via IE. PC needed 9 updates. I was able to successfully download and install one update as a test, then rebooted the PC, so the AU client is working when connected to Windows Update directly.
Then after stopping and starting the service net stop/start wuauserv and re-registering with wuauclt /resetauthorization /detectnow
this is how the log looks now:
2013-01-30 06:13:56:312 1108 230 Service ** START ** Service: Service startup
2013-01-30 06:13:56:312 1108 230 Service *********
2013-01-30 06:13:56:656 1108 230 Agent * WU client version 7.6.7600.256
2013-01-30 06:13:56:656 1108 230 Agent * Base directory: C:\WINDOWS\SoftwareDistribution
2013-01-30 06:13:56:656 1108 230 Agent * Access type: No proxy
2013-01-30 06:13:56:671 1108 230 Agent * Network state: Connected
2013-01-30 06:14:05:296 1108 b2c Agent *********** Agent: Initializing Windows Update Agent ***********
2013-01-30 06:14:05:328 1108 b2c Agent *********** Agent: Initializing global settings cache ***********
2013-01-30 06:14:05:328 1108 b2c Agent * WSUS server: http://10.75.77.8
2013-01-30 06:14:05:328 1108 b2c Agent * WSUS status server: http://10.75.77.8
2013-01-30 06:14:05:328 1108 b2c Agent * Target group: WSUS-BH-283
2013-01-30 06:14:05:328 1108 b2c Agent * Windows Update access disabled: No
2013-01-30 06:14:05:359 1108 b2c DnldMgr Download manager restoring 0 downloads
2013-01-30 06:14:05:750 1264 8c0 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0800) ===========
2013-01-30 06:14:05:750 1264 8c0 Misc = Process: C:\Program Files\LogMeIn\x86\LogMeIn.exe
2013-01-30 06:14:05:750 1264 8c0 Misc = Module: C:\WINDOWS\system32\wuapi.dll
2013-01-30 06:14:05:750 1264 8c0 COMAPI -------------
2013-01-30 06:14:05:750 1264 8c0 COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:14:05:796 1264 8c0 COMAPI ---------
2013-01-30 06:14:05:968 1264 8c0 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:14:08:203 1108 230 Report *********** Report: Initializing static reporting data ***********
2013-01-30 06:14:08:203 1108 230 Report * OS Version = 5.1.2600.3.0.65792
2013-01-30 06:14:08:328 1108 230 Report * Computer Brand = Dell Computer Corporation
2013-01-30 06:14:08:328 1108 230 Report * Computer Model = Dell DE051
2013-01-30 06:14:08:343 1108 230 Report * Bios Revision = A01
2013-01-30 06:14:08:343 1108 230 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2013-01-30 06:14:08:343 1108 230 Report * Bios Release Date = 2006-01-03T00:00:00
2013-01-30 06:14:08:343 1108 230 Report * Locale ID = 1033
2013-01-30 06:14:08:343 1108 db0 Agent *************
2013-01-30 06:14:08:343 1108 db0 Agent ** START ** Agent: Finding updates [CallerId = ]
2013-01-30 06:14:08:343 1108 db0 Agent *********
2013-01-30 06:14:08:343 1108 db0 Agent * Online = Yes; Ignore download priority = No
2013-01-30 06:14:08:343 1108 db0 Agent * Criteria = "IsInstalled = 0 AND IsHidden = 0"
2013-01-30 06:14:08:343 1108 db0 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
2013-01-30 06:14:08:343 1108 db0 Agent * Search Scope = {Machine}
2013-01-30 06:14:49:180 1108 230 AU ########### AU: Initializing Automatic Updates ###########
2013-01-30 06:14:49:211 1108 230 AU AU setting next sqm report timeout to 2013-01-30 14:14:49
2013-01-30 06:15:07:727 1108 230 AU # WSUS server: http://10.75.77.8
2013-01-30 06:15:07:727 1108 230 AU # Detection frequency: 6
2013-01-30 06:15:07:774 1108 230 AU # Target group: WSUS-BH-283
2013-01-30 06:15:07:774 1108 230 AU # Approval type: Scheduled (Policy)
2013-01-30 06:15:07:774 1108 230 AU # Scheduled install day/time: Every day at 18:00
2013-01-30 06:15:07:774 1108 230 AU # Auto-install minor updates: Yes (Policy)
2013-01-30 06:15:07:774 1108 230 AU # Will interact with non-admins (Non-admins are elevated (Policy))
2013-01-30 06:15:07:976 1108 230 AU Setting AU scheduled install time to 2013-01-31 02:00:00
2013-01-30 06:15:07:991 1108 230 AU Initializing featured updates
2013-01-30 06:15:08:053 1108 230 AU Found 0 cached featured updates
2013-01-30 06:15:08:410 1108 230 AU AU finished delayed initialization
2013-01-30 06:15:08:504 1108 230 AU #############
2013-01-30 06:15:08:504 1108 230 AU ## START ## AU: Search for updates
2013-01-30 06:15:08:504 1108 230 AU #########
2013-01-30 06:15:08:566 1108 230 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B62EA1DA-327C-4B0D-9858-F4E0E80A4661}]
2013-01-30 06:15:08:721 1108 db0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-01-30 06:15:08:721 1108 db0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://10.75.77.8/ClientWebService/client.asmx
2013-01-30 06:17:37:983 1108 db0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2013-01-30 06:17:37:983 1108 db0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://10.75.77.8/ClientWebService/client.asmx
2013-01-30 06:19:01:376 1108 db0 Agent * Found 0 updates and 64 categories in search; evaluated appl. rules of 1128 out of 2354 deployed entities
2013-01-30 06:19:05:287 1108 db0 Agent *********
2013-01-30 06:19:05:287 1108 db0 Agent ** END ** Agent: Finding updates [CallerId = ]
2013-01-30 06:19:05:287 1108 db0 Agent *************
2013-01-30 06:19:05:303 1108 db0 Agent *************
2013-01-30 06:19:05:303 1108 db0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-01-30 06:19:05:303 1108 db0 Agent *********
2013-01-30 06:19:05:303 1108 db0 Agent * Online = No; Ignore download priority = No
2013-01-30 06:19:05:303 1108 db0 Agent * Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' and IsAssigned=1 or IsHidden=0 and IsPresent=1
and DeploymentAction='Uninstallation' and IsAssigned=1 or IsHidden=0 and IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and RebootRequired=1 or IsHidden=0 and IsInstalled=0 and DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
2013-01-30 06:19:05:303 1108 db0 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-01-30 06:19:05:303 1108 db0 Agent * Search Scope = {Machine}
2013-01-30 06:19:05:380 1264 c50 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:05:380 1264 c50 COMAPI - Updates found = 0
2013-01-30 06:19:05:380 1264 c50 COMAPI ---------
2013-01-30 06:19:05:380 1264 c50 COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:05:380 1264 c50 COMAPI -------------
2013-01-30 06:19:11:123 1264 8c0 COMAPI -------------
2013-01-30 06:19:11:123 1264 8c0 COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:11:154 1264 8c0 COMAPI ---------
2013-01-30 06:19:11:341 1264 8c0 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:17:950 1108 db0 Agent * Found 0 updates and 64 categories in search; evaluated appl. rules of 248 out of 2354 deployed entities
2013-01-30 06:19:22:065 1108 db0 Agent *********
2013-01-30 06:19:22:065 1108 db0 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-01-30 06:19:22:065 1108 db0 Agent *************
2013-01-30 06:19:22:096 1108 9c0 AU >>## RESUMED ## AU: Search for updates [CallId = {B62EA1DA-327C-4B0D-9858-F4E0E80A4661}]
2013-01-30 06:19:22:096 1108 db0 Agent *************
2013-01-30 06:19:22:096 1108 db0 Agent ** START ** Agent: Finding updates [CallerId = ]
2013-01-30 06:19:22:096 1108 db0 Agent *********
2013-01-30 06:19:22:096 1108 db0 Agent * Online = Yes; Ignore download priority = No
2013-01-30 06:19:22:096 1108 db0 Agent * Criteria = "IsInstalled = 0 AND IsHidden = 0"
2013-01-30 06:19:22:096 1108 db0 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
2013-01-30 06:19:22:096 1108 db0 Agent * Search Scope = {Machine}
2013-01-30 06:19:22:096 1108 9c0 AU # 0 updates detected
2013-01-30 06:19:22:127 1108 9c0 AU #########
2013-01-30 06:19:22:127 1108 9c0 AU ## END ## AU: Search for updates [CallId = {B62EA1DA-327C-4B0D-9858-F4E0E80A4661}]
2013-01-30 06:19:22:127 1108 9c0 AU #############
2013-01-30 06:19:22:127 1108 9c0 AU Featured notifications is disabled.
2013-01-30 06:19:22:127 1108 9c0 AU Setting AU scheduled install time to 2013-01-31 02:00:00
2013-01-30 06:19:24:060 1108 db0 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-01-30 06:19:24:060 1108 db0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://10.75.77.8/ClientWebService/client.asmx
2013-01-30 06:19:49:358 1108 db0 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2013-01-30 06:19:49:358 1108 db0 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://10.75.77.8/ClientWebService/client.asmx
2013-01-30 06:19:52:040 1108 db0 Agent * Found 0 updates and 64 categories in search; evaluated appl. rules of 1128 out of 2354 deployed entities
2013-01-30 06:19:52:055 1108 db0 Agent *********
2013-01-30 06:19:52:055 1108 db0 Agent ** END ** Agent: Finding updates [CallerId = ]
2013-01-30 06:19:52:055 1108 db0 Agent *************
2013-01-30 06:19:52:102 1264 9b8 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:52:102 1264 9b8 COMAPI - Updates found = 0
2013-01-30 06:19:52:102 1264 9b8 COMAPI ---------
2013-01-30 06:19:52:102 1264 9b8 COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
2013-01-30 06:19:52:102 1264 9b8 COMAPI -------------
2013-01-30 06:19:52:523 1108 db0 Report REPORT EVENT: {A8F91037-C426-46F1-88BC-66F4C2A1CC34} 2013-01-30 06:15:08:053-0800 1 202 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed.
2013-01-30 06:19:52:570 1108 db0 Report REPORT EVENT: {A2D0D939-D68D-4E11-A548-56B3D6084738} 2013-01-30 06:19:05:194-0800 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 Success Software Synchronization Windows Update Client
successfully detected 0 updates.
2013-01-30 06:19:52:570 1108 db0 Report REPORT EVENT: {5E052410-7766-4F15-AF6E-F0342D680532} 2013-01-30 06:19:05:287-0800 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 Success Pre-Deployment Check Reporting client status.
2013-01-30 06:19:57:059 1108 db0 Report REPORT EVENT: {33FE34C6-1B74-4306-9F56-DDEF64B2060A} 2013-01-30 06:19:52:055-0800 1 147 101 {00000000-0000-0000-0000-000000000000} 0 0 Success Software Synchronization Windows Update Client
successfully detected 0 updates.
2013-01-30 06:19:57:074 1108 db0 Report REPORT EVENT: {9E7CC8EE-F9B2-4A00-8438-6502AB3079DF} 2013-01-30 06:19:52:055-0800 1 156 101 {00000000-0000-0000-0000-000000000000} 0 0 Success Pre-Deployment Check Reporting client status.
2013-01-30 06:32:40:415 1108 db0 Report Uploading 5 events using cached cookie, reporting URL = http://10.75.77.8/ReportingWebService/ReportingWebService.asmx
2013-01-30 06:32:40:461 1108 db0 Report Reporter successfully uploaded 5 events.
The WSUS client now seems to think it needs zero updates when talking to the WSUS server. What gives?
Having looked at 15 or 16 blogs on this subject over the last week or so and having done everything I can think of from a client and server side - I am at a loss to understand where issue lies. Can anyone help?
I'm looking for some help troubleshooting WSUS Role (Re)Install on Server 2012, we are seeing the error "Post-deployment Configuration" Failed.
The Role install process itself completes without error, but the post-deployment configuration task fails almost immediately with a generic error stating "Configuration failed. A log file was created at ..." and the referenced log file is always present but 1K on disk and seems to be empty, so I don't really have any good clues as to what is going wrong.
I have tried both the default WID option as well as pointing to an instance of SQL2012 running locally on the box (for SCCM 2012). One underlying question is if WSUS does in fact support SQL 2012, but since the install fails when using WID as well I don't THINK this is the issue.
IIS (Web role) is already installed and seems to be running properly, i.e. I can browse to the default home page. SCCM is also installed and has some roles configured, but I'm at the point of installing WSUS so the roles that depend on that are not currently installed.
I have tried removing the WSUS role, rebooting, and reinstalling with no change. I have also tried to follow all of the "forced" uninstall instructions on this forum (mainly http://social.technet.microsoft.com/Forums/en-US/winserverwsus/thread/f447e7d6-7007-4eb6-b38b-90f92525e09), but between not being able to find a trustworth source for the now defunct Windows Installer Cleanup Utility and also not finding the MSIZAP tool in 2012, there isn't much useful there other than some file and registry locations to check, which seem to be uninstalling cleanly when I remove the role and reboot.
I'd appreciate any clues on what other logs to check or what else might be going wrong. Please let me know if you need any other details of the problem.
Thanks,
-Scott