Hello All,

I just joined a company and almost immediately the IT team went on leave am the only IT Engineer available on site no handing over note.

Here are the issue presently facing.

1.Unable to deploy Window update  services software on Server 2012 r2 which runs AD and some other Roles and is offline.

2. Printer services is showing up error below

hr = 0x80070005

and

error code '0x800708ca

3.Also i notice all the printer connected on the LAN about 10 of them are now showing offline most users can't print again.

Unable to also do remote desktop on some servers after troubleshooting severally

4.Finally, what is best practiced to download and install Windows update on servers that are not browsing.

Please, I need help from the expect.

Hi

My environment consist of 1 primary upstream server located in the USA and 3 downstream servers located in Europe. I am not familiar with the process of deploying language packs. I know I need to enable them for download on my upstream server and then on the download servers that they are applicable.

What exactly does enabling language pack do? Am I correct in stating that patches will be downloaded in the language(Italian) of the pack selected. Or is language pack just one patch in the language specified?

Also if I approve the patch in (Italian) will it only install on applicable computers(that our in Italian or to all computers including the ones in English?

Anth

TheAtulA

Good day Sir

I have installed WSUS on Windows Server 2008 R2 64 successfully, the the Synchronization started now the console shows the below error message i'm not sure whether is the Server that is not powerful enough we have +- 80 Client computers.

The Server Spec is as follows: 

>>Processor Intel R Core (TM)2 Quad CPU Q8300 @ 2.50 GHz

>>RAM 6 GB

>>Server has two Discs Drive C and Drive with WIS Database

Good day Sir

I have installed WSSUS role succesfull now the console does not want to open and gives the following errors:

The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,

Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.

The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,

Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.

System.Xml.XmlException -- '_', hexadecimal value 0x14, is an invalid character. Line 3, position 476.

Source

System.Xml

Stack Trace:

  at System.Xml.XmlTextReaderImpl.Throw(Exception e)

  at System.Xml.XmlTextReaderImpl.ThrowInvalidChar(Int32 pos, Char invChar)

  at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, BufferBuilder internalSubsetBuilder, Int32& charCount, EntityType& entityType)

  at System.Xml.XmlTextReaderImpl.ParseNumericCharRef(Boolean expand, BufferBuilder internalSubsetBuilder, EntityType& entityType)

  at System.Xml.XmlTextReaderImpl.HandleEntityReference(Boolean isInAttributeValue, EntityExpandType expandType, Int32& charRefEndPos)

  at System.Xml.XmlTextReaderImpl.ParseAttributeValueSlow(Int32 curPos, Char quoteChar, NodeData attr)

  at System.Xml.XmlTextReaderImpl.ParseAttributes()

  at System.Xml.XmlTextReaderImpl.ParseElement()

  at System.Xml.XmlTextReaderImpl.ParseElementContent()

  at System.Xml.XmlLoader.LoadNode(Boolean skipOverWhitespace)

  at System.Xml.XmlLoader.ReadCurrentNode(XmlDocument doc, XmlReader reader)

  at System.Xml.XmlDocument.ReadNode(XmlReader reader)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(XmlReader reader)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)

** this exception was nested inside of the following exception **

System.InvalidOperationException -- Response is not well-formed XML.

Source

Microsoft.UpdateServices.BaseApi

Stack Trace:

  at Microsoft.UpdateServices.Internal.ClassFactory.CallStaticMethod(Type type, String methodName, Object[] args)

  at Microsoft.UpdateServices.Internal.BaseApi.Subscription.GetSynchronizationHistory(DateTime fromDate, DateTime toDate)

  at Microsoft.UpdateServices.Internal.BaseApi.Subscription.GetLastSynchronizationInfo()

  at Microsoft.UpdateServices.UI.AdminApiAccess.SynchronizationManager.GetSyncStatus()

  at Microsoft.UpdateServices.UI.SnapIn.Scope.SyncResultsListScopeNode.RefreshActionsPaneActions()

  at Microsoft.UpdateServices.UI.SnapIn.Scope.SyncResultsListScopeNode..ctor(ServerTools serverTools)

  at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.AddChildNodes()

  at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole)

  at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.OnExpand(AsyncStatus status)



Hello,

I am facing issues with October and November Security Monthly Updates.

The updates are reverting at 94% or sometimes 96%. 

The error code I am getting is 80070422. Error details from Windows Update Log:

I have already installed KB3177467. Still doesn't work. Tried all other troubleshooting steps with no success.

Please find the Windowsupdates.log and CBS logs here:

https://1drv.ms/f/s!AsGLe0aBawYWaisLxWvlLk9697w

Any help will be appreciated.

Regards,

MMK

Hi Team,

I removed few machines from Domain a week back but they are still showing up now in WSUS console. They should go off automatically right? How to perform the clean up or is there anyway to automate it?

Regards,

Santhosh B S

Regards, Santhosh B S

I am receiving the bellow error on my WSUS 2016 Enterprise server patch version 1803. 

I have tried to fix this, using the additional memory method, cleaning up the DB, changing the .net version etc.. 

Still does not work correctly, it seems to be fine, then bam, just freezes with the below error, which requires a server reboot to clear. I have attempted IISReset, and also restarting the WWW publishing services, to no avail. 

I have also rebuilt the server twice, thinking that would help, first rebuild was from 2012R2 where this occurred, to 2016 1607 version with the original DB details,.. Same error eventually.. Then a fresh rebuild with a new server name.. same issue occurs.. I have googled this and it appears common yet no one has yet to fix it.. 

The WSUS administration console was unable to connect to the WSUS Server via the remote API. Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service. System.Net.WebException -- The request failed with HTTP status 503: Service Unavailable. Source System.Web.Services Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPGetConfiguration() at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetConfiguration() at Microsoft.UpdateServices.Internal.BaseApi.UpdateServerConfiguration.Load() at Microsoft.UpdateServices.Internal.ClassFactory.CreateWellKnownType(Type type, Object[] args) at Microsoft.UpdateServices.Internal.ClassFactory.CreateInstance(Type type, Object[] args) at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetConfiguration() at Microsoft.UpdateServices.UI.AdminApiAccess.CachedObject.RefreshCache() at Microsoft.UpdateServices.UI.AdminApiAccess.CachedObject.GetFromCache() at Microsoft.UpdateServices.UI.AdminApiAccess.PermissionsManager.IsPermitted(UserOperation operation) at Microsoft.UpdateServices.UI.SnapIn.Scope.UpdatesSummaryScopeNode.RefreshPermissions() at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.AddChildNodes() at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole) at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ResetScopeNode() 

Rob

Dear Microsoft technical support,

Recently a few month, we have some physical server (run windows server 2008 R2) install windows update file (KB) failure through WSUS. When install windows update completed, server reboot, enter windows system, screen display "Failure Configuring Windows Updates Reverting change" message. 

I refers your technical document (below link) and try to fix this windows update problem

https://support.microsoft.com/en-us/help/2509997/you-can-t-install-updates-on-a-windows-based-computer

Please find attach report as below. This report record my solution result. But not successful finally.

https://drive.google.com/drive/folders/17reWlZ4I76K9_D65L7M-xvraiM3h3tpP (file name: Report for resolve windows update installation failure.doc)

I also send you below log files. Please help check and provide solution to me. Thank you very much

https://drive.google.com/drive/folders/17reWlZ4I76K9_D65L7M-xvraiM3h3tpP

(file name: CBS.log / CheckSUR.log / WindowsUpdate.log)

Thank you very much

Best regards

Vincent Kan

Dear Microsoft Server Support Team,

KB4462923install failed in "Windows Server 2008 R2 Standard" operation system, open Event Viewer, find error message: Installation Failure: Windows failed to install the following update with error 0x80070020: 2018-10 Security Monthly Quality Rollup for Windows Server 2008 R2 for x64-based Systems (KB4462923).  [Event ID: 20]

1. Why KB4462923 install failed ?  

2. How to fix this issue ?   

Hi all,

We have a single domain, with a WSUS 3.0 Server running on W2008R2.

We have domain-joined machines running Windows 10 Pro.

Those machines get their updates normally through that WSUS server, and the rest of them (W7, W8.1) too.

We have the products "Windows 10" and "Windows 10 Feature on Demand" checked on WSUS.

We have approved ".Net 3.5 Feature on Demand for X64" and ".Net 3.5 Feature on Demand for X86" on WSUS.

Our issue is: when a user goes to Programs and Features on Windows 10, and tries to activate .Net Framework 3.5, he receives error 0x800F081F.

A network capture shows the machine is trying to contact our WSUS server for this, not Windows Update.

My questions are:

• Is there any way to allow users to install .Net Framework 3.5 on Windows 10 from WSUS?
• Does it work on W2008R2-based WSUS? Or only on W2012R2?
• Are those ".Net 3.5 Feature on Demand for XXX" updates the correct ones we have to approve to make it work?
  
• Is going to Control Panel - Programs and Features and checking .Net Framework 3.5 the correct way to install it on Windows 10 through WSUS?
• If .Net Framework 3.5 can't be deployed to Windows 10 through WSUS, how can we make it contact Windows Update for it? We have the GPO policy setting "contact Windows Update directly" set but it looks like Windows 10 ignores it (8.1 works though).

Thanks in advance, 

José

Host - Server2012R2 Datacenter

Client - Server2012R Standard

my Hyper -V systems are not downloading WSUS updates. I "see' them but immediately get error 80244019.

I need to get current. I am recovering from ransomware attack and need to rebuild the SharePoint & SQL Hyper-v systems. They are up but I need to apply WSUS updates to get them current.

I reset catroot2 but still fail on download. 

Physical servers taker the downloads as well as Win10 clients.

Thanks

John Lenz

I have just installed a brand new Windows Server 2012 R2 instance with 8 processor cores and 16gb ram and 2tb disk.

I installed the WSUS server role and chose quite a few classifications (we have a large environment with servers and desktops ranging from xp/2003 all the way up to 10 and we use about 60% of the product classifications because we have a *lot* of microsoft products.

When I click on the all udpates list and set it to show me "unapproved" "any" the WSUS client crashes and I get "Error : connection error. An error occured trying to connect to the WSUS server..." Click reset server node to try to connect to the server again.

Things I have tried to fix this :

1)ALL WINDOWS UPDATES ARE INSTALLED FROM THE INTERNET, NOTHING OUT OF DATE.

2)Reboot.  This will allow me to load the console but looking at any lists of updates like the "all udpates" list crashes it again

3)This : https://support.microsoft.com/en-us/kb/3159706.  That helped until I tried to approve some packages, after approving about 2000 it died again.

4)Restarting the WID service, the WSUS service and the IIS services (and all related services).  THIS DOES NOTHING!

So no matter what I do, this unstable thing will just disconnect.

How do I fix this?

From what I read 3159706 was supposed to fix it, but it only fixed it for about 30 seconds, and now its back to dead again...

Server is throwing this error : SCCM and WSUS Sync error.

Sync failed: The operation has timed out

Microsoft.UpdateServices.Internal.DatabaseAccess.ApiRemotingCompressionProxy.GetWebResponse

prakash

We're running ConfigMgr 1709 on Server 2012 R2, with separate WSUS server, also on Server 2012 R2

I've noticed that Windows 10 updates aren't going out to the clients, and upon investigation seem to be failing their download in SCCM. When I attempt to download them manually, the return the error:

    Failed to download content id 16994128. Error: Invalid certificate signature

PatchDownloader.log has the following error:

    Contentsource = http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2017/10/windows10.0-kb4041691-x64-express_c12679a948d76fc5800f8b897db03bca6496eb2e.cab .
    Downloading content for ContentID = 16987410,  FileName = Windows10.0-KB4041691-x64_1.psf.
    Download     http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2017/10/windows10.0-kb4041691-x64_1_fdd27de63b163796b760a5feb9e65ea8f9cfded7.psf to C:\Users\ADMIN-~3\AppData\Local\Temp\2\CAB97E3.tmp returns 0
    Cert revocation check is disabled so cert revocation list will not be checked.    To enable cert revocation check use: UpdDwnldCfg.exe /checkrevocation    Hash verification of file C:\Users\ADMIN-~3\AppData\Local\Temp\2\CAB97E3.tmp failed, error 0x17    ERROR: DownloadContentFiles() failed with hr=0x8007362e

Other times it can fail with:

    ERROR: DownloadContentFiles() failed with hr=0x80072ee2

Additionally, KB2919355 and KB3159706 are both installed on our SCCM and WSUS servers, with post install steps completed.

Oddly, many other WSUS updates are not affected, such as: Windows 7, 2008 R2, 2012, 2012 R2, 2016, and Adobe Flash for Windows 10

I wanted to try out a test 2019 WSUS server. Everything seemed to go smoothly, however when I go look at All Computers, I get a system node crash.

I looked at the possibility of it being the same as the bad BIOS name, but I do not seem to see any errors.

The error is as follows:

The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists, 

Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.


System.InvalidCastException -- Unable to cast object of type 'System.Guid' to type 'System.String'.

Source
Microsoft.UpdateServices.BaseApi

Stack Trace:
   at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow(SoapException soapException)
   at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPSearchComputers(String computerTargetScopeXml)
   at Microsoft.UpdateServices.Internal.BaseApi.ComputerTarget.SearchComputerTargets(ComputerTargetScope searchScope, UpdateServer updateServer)
   at Microsoft.UpdateServices.UI.AdminApiAccess.ComputerTargetManager.GetComputerTargets(ComputerTargetScope searchScope)
   at Microsoft.UpdateServices.UI.AdminApiAccess.BulkComputerPropertiesCache.GetAndCacheComputers(ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)
   at Microsoft.UpdateServices.UI.SnapIn.Pages.ComputersListPage.GetListRows()

Has anyone come across this error before?

Thanks.

Hi,

I have issuse whith WSUS server and SCCM 2012

https://social.technet.microsoft.com/Forums/en-US/a05ae5e1-0596-44aa-8428-28f6edb2e6dd/sccm-2012-wsus-2016-error-80072ee2?forum=winserverwsus

CPU usege now is normal - 3-5%

At WSUS IIS can see clients connections. In Software Center I can see updates.

At SCCM  some errors, after manual update

WCM.log

Successfully connected to server: WSUS01.contoso.com, port: 8530, useSSL: False

PublishApplication(7A13F890-DA80-48C3-97DE-C9C528F73A2D) failed with error System.InvalidOperationException: Publishing operation failed because the console and remote server versions~~do not match.~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)

STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=CM01.ZONE3000.NET SITE=Z3K PID=4968 TID=8568 GMTDATE=Wed Aug 02 04:39:56.729 2017 ISTR0="7A13F890-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.8458.1000" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0

Failed to publish client with error = 0x80131509

At WSYNCMGR.log

sync: SMS synchronizing updates, processed 4836 out of 4836 items (100%)

Sync failures summary:Failed to sync update 4142c3c9-14ad-4956-a93f-6e6c6a0e7141. Error: The Microsoft Software License Terms have not been completely downloaded and~~cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById

Greetings,

Doing some testing on our test environment with the 1809 update. After the update the systems will not check the WSUS server for updates but instead will try to reach the internet. This system is not internet connected so it fails. Here is the log from the last run. Can anyone tell me where to start looking? 

I have tried to stop the services and rename the SoftwareDistribution folder but that didn't help either.

Any ideas?

2018/11/27 08:22:00.8405505 6132  8772  Shared          InitializeSus
2018/11/27 08:22:00.8410335 6132  8772  IdleTimer       Non-AoAc machine.  Aoac operations will be ignored.
2018/11/27 08:22:00.8411397 6132  8772  Agent           WU client version 10.0.17763.107
2018/11/27 08:22:00.8414541 6132  8772  Agent           SleepStudyTracker: Machine is non-AOAC. Sleep study tracker 

disabled.
2018/11/27 08:22:00.8415346 6132  8772  Agent           Base directory: C:\WINDOWS\SoftwareDistribution
2018/11/27 08:22:00.8451521 6132  8772  Agent           Datastore directory: C:\WINDOWS\SoftwareDistribution\DataStore

\DataStore.edb
2018/11/27 08:22:00.8461652 6132  8772  DataStore       JetEnableMultiInstance succeeded - applicable param count: 5, 

applied param count: 5
2018/11/27 08:22:01.3599102 6132  8772  DataStore       Service 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7 added
2018/11/27 08:22:01.4069797 6132  8772  DataStore       Service 9482F4B4-E343-43B6-B170-9A65BC822C77 added
2018/11/27 08:22:01.4292586 6132  8772  DataStore       Data store successfully created
2018/11/27 08:22:01.4344485 6132  8772  Shared          UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2018/11/27 08:22:01.4350496 6132  8772  Shared          UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2018/11/27 08:22:01.4396549 6132  8772  Shared          Network state: Connected
2018/11/27 08:22:01.8532419 6132  8772  Misc            *FAILED* [8024000C] LoadHistoryEventFromRegistry completed
2018/11/27 08:22:01.8534011 6132  8772  Shared          UpdateNetworkState Ipv6, cNetworkInterfaces = 0.
2018/11/27 08:22:01.8534088 6132  8772  Shared          UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2018/11/27 08:22:01.8534180 6132  8772  Shared          Power status changed
2018/11/27 08:22:01.8580060 6132  8772  Agent           WU client refresh cache for DisableWUAccess policy: 1
2018/11/27 08:22:01.8580098 6132  8772  Agent           Initializing global settings cache
2018/11/27 08:22:01.8580112 6132  8772  Agent           WSUS server: http://WSUSSERVER:8530
2018/11/27 08:22:01.8580127 6132  8772  Agent           WSUS status server: http://WSUSSERVER:8530
2018/11/27 08:22:01.8580140 6132  8772  Agent           Alternate Download Server: http://WSUSSERVER:8530
2018/11/27 08:22:01.8580152 6132  8772  Agent           Fill Empty Content Urls: No
2018/11/27 08:22:01.8580163 6132  8772  Agent           Target group: Update Testing
2018/11/27 08:22:01.8580174 6132  8772  Agent           Windows Update access disabled: Yes
2018/11/27 08:22:01.8580187 6132  8772  Agent           Do not connect to Windows Update Internet locations: No
2018/11/27 08:22:01.8802420 6132  8772  Agent           Initializing Windows Update Agent
2018/11/27 08:22:01.8804247 6132  8772  Agent           CPersistentTimeoutScheduler | GetTimer, returned hr = 0x80248007
2018/11/27 08:22:01.8804356 6132  8772  Agent           CPersistentTimeoutEvent | Resubscribe, no existing/cached timer 

for Id=29A863E7-8609-4D1E-B7CD-5668F857F1DB.
2018/11/27 08:22:01.8804472 6132  8772  Agent           Adding timer: 
2018/11/27 08:22:01.8804538 6132  8772  Agent               Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2018-11-

28 13:22:01, not idle-only, not network-only
2018/11/27 08:22:01.8821476 6132  8772  IdleTimer       IdleTimer::NetworkStateChanged. Network connected? Yes
2018/11/27 08:22:01.9130973 6132  3044  DownloadManager Received power state change notification: Old: <unknown>; New: AC.
2018/11/27 08:22:01.9130995 6132  3044  DownloadManager Power state changed from <unknown> to AC.
2018/11/27 08:22:32.1551466 6068  644   ComApi          IUpdateServiceManager::AddService2
2018/11/27 08:22:32.1551509 6068  644   ComApi          Service ID = {7971f918-a847-4430-9279-4a52d1efe18d}
2018/11/27 08:22:32.1551547 6068  644   ComApi          Allow pending registration = Yes; Allow online registration = Yes; 

Register service with AU = Yes
2018/11/27 08:22:32.1695762 6132  5316  Agent           *FAILED* [80248014] GetServiceObject couldn't find service 

'117CAB2D-82B1-4B5A-A08C-4D62DBEE7782'.
2018/11/27 08:22:32.1695836 6132  5316  Agent           *FAILED* [80248014] Method failed 

[CAgentServiceManager::GetServiceObject:1902]
2018/11/27 08:22:32.1695913 6132  5316  Agent           *FAILED* [80248014] GetServiceObject couldn't find service 

'855E8A7C-ECB4-4CA3-B045-1DFA50104289'.
2018/11/27 08:22:32.1695958 6132  5316  Agent           *FAILED* [80248014] Method failed 

[CAgentServiceManager::GetServiceObject:1902]
2018/11/27 08:22:32.1696030 6132  5316  Agent           *FAILED* [80248014] GetServiceObject couldn't find service 

'7971F918-A847-4430-9279-4A52D1EFE18D'.
2018/11/27 08:22:32.1696072 6132  5316  Agent           *FAILED* [80248014] Method failed 

[CAgentServiceManager::GetServiceObject:1902]
2018/11/27 08:22:32.2112812 6132  5316  SLS             Get response for service 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 - 

forceExpire[False] asyncRefreshOnExpiry[False]
2018/11/27 08:22:32.2113895 6132  5316  SLS             Retrieving SLS response from server...
2018/11/27 08:22:32.2122669 6132  5316  SLS             Making request with URL HTTPS://sls.update.microsoft.com/SLS/

{117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 and send SLS events.
2018/11/27 08:22:43.2776497 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:22:43.2778084 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:22:54.3387187 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:22:54.3388610 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:0
2018/11/27 08:23:05.4082514 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:23:05.4082755 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:23:16.4895818 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:23:16.4896129 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:1
2018/11/27 08:23:27.5883974 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:23:27.5884365 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:23:38.6812111 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:23:38.6812414 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:2
2018/11/27 08:23:49.7840964 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:23:49.7841295 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:24:00.8383570 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:00.8383975 6132  5316  SLS             Complete the request URL HTTPS://sls.update.microsoft.com/SLS/

{117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 with [8024402C] and http status code[0] and send SLS events.
2018/11/27 08:24:00.8384340 6132  5316  SLS             *FAILED* [8024402C] GetDownloadedOnWeakSSLCert
2018/11/27 08:24:00.8385510 6132  5316  SLS             *FAILED* [8024402C] Method failed [CSLSClient::GetResponse:622]
2018/11/27 08:24:00.8385767 6132  5316  Agent           Failed to retrieve SLS response data for service 117cab2d-82b1-

4b5a-a08c-4d62dbee7782, error = 0x8024402c
2018/11/27 08:24:00.8386132 6132  5316  Agent           *FAILED* [8024402C] Caller Service Recovery failed to opt in to 

service 117cab2d-82b1-4b5a-a08c-4d62dbee7782 (cV: 06PYBxxVUUCkfiBT.1)
2018/11/27 08:24:00.9255258 6132  5316  SLS             Get response for service 855E8A7C-ECB4-4CA3-B045-1DFA50104289 - 

forceExpire[False] asyncRefreshOnExpiry[False]
2018/11/27 08:24:00.9256829 6132  5316  SLS             Retrieving SLS response from server...
2018/11/27 08:24:00.9263204 6132  5316  SLS             Making request with URL HTTPS://sls.update.microsoft.com/SLS/

{855E8A7C-ECB4-4CA3-B045-1DFA50104289}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 and send SLS events.
2018/11/27 08:24:12.0005654 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:12.0005943 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:24:23.0594036 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:23.0594343 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:0
2018/11/27 08:24:34.1679051 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:34.1679337 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:24:45.2300423 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:45.2300919 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:1
2018/11/27 08:24:56.2883156 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:24:56.2883299 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:25:07.3589530 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:25:07.3589838 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:2
2018/11/27 08:25:18.4192188 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:25:18.4193169 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:25:29.4799506 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:25:29.4799969 6132  5316  SLS             Complete the request URL HTTPS://sls.update.microsoft.com/SLS/

{855E8A7C-ECB4-4CA3-B045-1DFA50104289}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 with [8024402C] and http status code[0] and send SLS events.
2018/11/27 08:25:29.4800215 6132  5316  SLS             *FAILED* [8024402C] GetDownloadedOnWeakSSLCert
2018/11/27 08:25:29.4801658 6132  5316  SLS             *FAILED* [8024402C] Method failed [CSLSClient::GetResponse:622]
2018/11/27 08:25:29.4801887 6132  5316  Agent           Failed to retrieve SLS response data for service 855e8a7c-ecb4-

4ca3-b045-1dfa50104289, error = 0x8024402c
2018/11/27 08:25:29.4802182 6132  5316  Agent           *FAILED* [8024402C] Caller Service Recovery failed to opt in to 

service 855e8a7c-ecb4-4ca3-b045-1dfa50104289 (cV: 06PYBxxVUUCkfiBT.2)
2018/11/27 08:25:29.5743735 6132  5316  SLS             Get response for service 7971F918-A847-4430-9279-4A52D1EFE18D - 

forceExpire[False] asyncRefreshOnExpiry[True]
2018/11/27 08:25:29.5745969 6132  5316  SLS             Retrieving SLS response from server...
2018/11/27 08:25:29.5758309 6132  5316  SLS             Making request with URL HTTPS://sls.update.microsoft.com/SLS/

{7971F918-A847-4430-9279-4A52D1EFE18D}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 and send SLS events.
2018/11/27 08:25:40.6231711 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:25:40.6231954 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:25:51.6776217 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:25:51.6777224 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:0
2018/11/27 08:26:00.1852773 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:00.1853026 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:26:11.2338180 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:11.2338557 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:1
2018/11/27 08:26:22.3356747 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:22.3356988 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:26:33.4030335 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:33.4030651 6132  5316  Misc            *FAILED* [8024402C] Library download error. Will retry. Retry 

Counter:2
2018/11/27 08:26:44.5042011 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:44.5043573 6132  5316  Misc            *FAILED* [8024402C] WinHttp: SendRequestToServerForFileInformation 

(retrying with default proxy)
2018/11/27 08:26:55.5571490 6132  5316  Misc            *FAILED* [80072EE7] Send request
2018/11/27 08:26:55.5571883 6132  5316  SLS             Complete the request URL HTTPS://sls.update.microsoft.com/SLS/

{7971F918-A847-4430-9279-4A52D1EFE18D}/x64/10.0.17763.107/0?CH=765&L=en-US&P=&PT=0x30&WUA=10.0.17763.107&MK=Dell+Inc.&MD=Latitude+E5540 with [8024402C] and http status code[0] and send SLS events.
2018/11/27 08:26:55.5572060 6132  5316  SLS             *FAILED* [8024402C] GetDownloadedOnWeakSSLCert

Hi All,
I need to setup WSUS to patch servers in a secure test environment. The Network has no access to the internet.
Has anyone done something similar they can advise on. ? Even the initial configuration of wsus requires internet and won't go by it.
Appreciate any help/feedback.
Thanks

Joe.

Thanks - Joe.