wsus problem in adding two server from one image

November 9, 2019, 1:25 am

≫ Next: Windows 2012 updates fail to install - error 0x80070490

≪ Previous: WSUS update deployed with Deadline while Group Policy on the client machines are 3- Auto download and notify to install

hi

I have a problem with two servers one is my antivirus and the other is my App server

I have run a new downstream wsus server in one of my remote offices because I have a deadline to run their servers so I take an OVF from a sever and run these servers from that OVF

( my hypervisor is esxi 6 and my servers are windows server2012 R2)

when i apply wsus policies both server got the policy but only one of them is on my wsus and as i delete it the other one added but not both of them

I'm wondering is it related to the OVF which both servers installed from it?

how could I fix it?

thanks

↧

Windows 2012 updates fail to install - error 0x80070490

November 9, 2019, 3:26 pm

≫ Next: WInodws 10 and WSUS

≪ Previous: wsus problem in adding two server from one image

Hello to all the experts,

I am struggling with failed windows updates till July/August 2019 - the Security Monthly Quality Rollups fail to install (while other updates seem to install OK). The result is that during GUI updates are installed OK, then during a reboot there's dark-blue screen which says that updates are being prepared, the percentage quickly goes to 12%, then a message about failure and that the update is being rolled back.

After long, long investigation and trying to reset windows updates in numerous ways (which didn't solved my problem), I have found in my CBS.log:

...Info  CBS Doqe: [Forward] Installing driver updates, Count 5
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 7.
Info  CBS         INSTALL index: 2, phase: 1, result 0, inf: cpu.inf
Info  CBS         INSTALL index: 3, phase: 1, result 0, inf: wvms_pp.inf
Info  CBS         INSTALL index: 4, phase: 1, result 0, inf: hdaudio.inf
Info  CBS         INSTALL index: 5, phase: 1, result 0, inf: tsprint.inf
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 8.
Info  CBS         INSTALL index: 6, phase: 1, result 0, inf: tsusbhub.inf
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 9.
Info  CBS         INSTALL index: 2, phase: 2, result 0, inf: cpu.inf
Info  CBS         INSTALL index: 3, phase: 2, result 0, inf: wvms_pp.inf
Info  CBS         INSTALL index: 4, phase: 2, result 0, inf: hdaudio.inf
Info  CBS         INSTALL index: 5, phase: 2, result 0, inf: tsprint.inf
Info  CBS         INSTALL index: 6, phase: 2, result 0, inf: tsusbhub.inf
Info  CBS         INSTALL index: 2, phase: 3, result 0, inf: cpu.inf
Info  CBS         INSTALL index: 3, phase: 3, result 0, inf: wvms_pp.inf
Info  CBS         INSTALL index: 4, phase: 3, result 0, inf: hdaudio.inf
Info  CBS         INSTALL index: 5, phase: 3, result 0, inf: tsprint.inf
Info  CBS         INSTALL index: 6, phase: 3, result 0, inf: tsusbhub.inf
Info  CBS DriverUpdateInstallUpdates failed [HRESULT = 0x80070bc2 - ERROR_SUCCESS_REBOOT_REQUIRED]
Info  CBS Doqe: System reboot required.
Info  CBS Perf: Doqe: Install ended.
Info  CBS Doqe:   q-uninstall: Inf: wvms_pp.inf, Ranking: 2, Device-Install: 0, Key: 2, Identity: wvms_pp.inf, Culture=neutral, Type=driverUpdate, Version=6.2.9200.22573, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS
Info  CBS Doqe:   q-uninstall: Inf: cpu.inf, Ranking: 2, Device-Install: 0, Key: 12, Identity: cpu.inf, Culture=neutral, Type=driverUpdate, Version=6.2.9200.22794, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS
Info  CBS Perf: Doqe: Uninstall started.
Info  CBS Doqe: [Forward] Uninstalling driver updates, Count 2
Info  CBS DriverUpdateUninstallUpdates failed [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Info  CBS Doqe: Failed uninstalling driver updates [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Info  CBS Perf: Doqe: Uninstall ended.
Info  CBS Failed uninstalling driver updates [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Error CBS Startup: Failed while processing non-critical driver operations queue. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
Info  CBS Startup: Rolling back KTM, because drivers failed.
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 12.
Info  CBS Setting ExecuteState key to: CbsExecuteStateStageDrivers | CbsExecuteStateFlagRollback | CbsExecuteStateFlagDriversFailed
Info  CBS SetProgressMessage: progressMessageStage: -1, ExecuteState: CbsExecuteStateStageDrivers | CbsExecuteStateFlagRollback | CbsExecuteStateFlagDriversFailed, SubStage: 0
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Rollback.
Info  CBS Setting original failure status: 0x80070490, last forward execute state: CbsExecuteStatePrimitives
Info  CBS SetProgressMessage: progressMessageStage: -1, ExecuteState: CbsExecuteStateStageDrivers | CbsExecuteStateFlagRollback | CbsExecuteStateFlagDriversFailed, SubStage: 1
Info  CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Rollback.
...

Isn't that mega stupid, that some driver update requires reboot, so Microsoft Windows should reboot, not abort the update and rollback. Moreover it says that "while processing non-critical driver operations".

I have tried to manually install tsusbhub.inf, but got an error "Cannot find the element". Does it have anything with 0x80070490 - ERROR_NOT_FOUND? Only the developer which wrote the code will now...

Anyway, the question is - what can I do about that to be able to install the updates? Did anyone solved specifically THAT error?

Please don't give me answers to reset windows updates with MS-FixIt or Reset-WindowsUpdate.ps1 or sfc /scannow or DISM method or windowsupdate.diagcab or manual install of the latest servicing stack. I have already tried all of them without ANY SUCCESS.

Please help!

Edit: Also I cannot install "Internet Explorer 11 for Windows Server 2012 for x64-based systems" from Microsoft Update - in GUI it gets installed and requires a reboot, but during the reboot, the above drivers fail to install and performs rollback.

I can also see, that rollback is not done completely, because in %windir%\System32\DriverStore\FileRepository\ I have found several cpu.inf_amd64_[hash] folders, which hold the same files! (only most minor version number in DriverVer=04/21/2009,6.2.9200.22859 differs).

Also, pnputil.exe -a C:\Windows\System32\DriverStore\FileRepository\cpu.inf_amd64_28a40dfa4ffefab2\cpu.inf

fails (Adding the driver package failed: Cannot find specified file).

↧

WInodws 10 and WSUS

November 11, 2019, 7:11 am

≫ Next: windows 10 1909 not correct number version in WSUS

≪ Previous: Windows 2012 updates fail to install - error 0x80070490

We are implementing WSUS in a Horizon View VDI environment. This questions will be just pertaining to updating dedicated VMs within this VDI environment. OS is Windows 10 1803

We have the following regedit entries

HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate

WUServer - server URL
WUStatusServer - same as above
TargetGroupEnabled - 1
SetActiveHours - 1
SetEngagedRestartTransitionSchedule - 1
EngagedRestartDeadline - 2
EngagedRestartSnoozeSchedule - 2
EngagedRestartTransitionSchedule - 2
TargetGroup - Target Group Name
ActiveHoursStart - 7
ActiveHoursEnd - 18

HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU\

NoAutoUpdate - 0
UseWUServer - 1
AUOptions - 4
DetectionFrequency - 22
DetectionFrequencyEnabled - 1
AllowMMUpdateService - 1
ScheduledInstallDay - 3
ScheduleInstallTime - 3

With these setting, the VM registers itself with the WSUS server and computer group. It will download any needed update, and install at the appropriate time. I had set these settings wanting to do engaged restart. IT is my understanding that if the user is logged in it will prompt for a restart - if the user is not logged in it will reboot outside of active hours. This will be within the EngagedRestartDeadline (my purpose - 2 days). Then after two days, it will attempt to notify the user to schedule the reboot, allowing the user to 'snooze this' during the EngagedRestartSnoozeSchedule (again, with my settings two days). After this period, it will change to a pending reboot (again, for my settings, two days). However, I am not getting any notifications. Do I need to add other settings for the notifications within the Engaged Restart process?

↧

windows 10 1909 not correct number version in WSUS

November 15, 2019, 12:37 am

≫ Next: error 0x80070002 and/or 0x80070020 on several Server 2008 R2 with update KB4467107 failing and preventing newer updates to succeed

≪ Previous: WInodws 10 and WSUS

Hi,
I noticed that my computers who have upgrade to windows 10 1909 have not the correct number version in wsus report.
They appears like 10.0.18362.xxx instead of 18363.xxx (https://docs.microsoft.com/fr-fr/windows/release-information/)

Is it normal ?

Regards

↧

error 0x80070002 and/or 0x80070020 on several Server 2008 R2 with update KB4467107 failing and preventing newer updates to succeed

October 3, 2019, 1:41 am

≫ Next: Win10 Servicing Stack updates with WSUS

≪ Previous: windows 10 1909 not correct number version in WSUS

On almost all our Servers running WIndows Server 2008 R2 we have an issue with updating sincekb4467107

https://support.microsoft.com/en-gb/help/4467107/windows-7-update-kb4467107

This failing update is preventing a lot of newer updates to fail.

Tried the following options but nothing solves it;

- clean boot install
- manual install (also unpacked manual dism install)
- wuagent cleanup

- sfc scan

- chkdsk scan

- dism cleanup
- system readiness installation
- installing latest service stack (kb4516655)

If there is anyone who has more ideas to help. It is a wsus environment and there are a few servers that do not have the issue but also not having that patch installed but others do.

Another typical thing is that the few servers that do not have these issues have a windows update agent version 7.6.7601.24436 (2019/04) while the failing servers have version 7.6.7601.24085 (2018/03).

Checking the servers online gets other updates but then those also fail again. Below some of the errors from several logfiles.

2019-10-01 09:54:14, Error CBS Failed to pre- stage package: Package_for_RollupFix~31bf3856ad364e35~amd64~~7601.24241.1.6 [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2019-10-01 09:54:14, Info CBS Perf: Stage chain complete.
2019-10-01 09:54:14, Info CBS Failed to stage execution chain. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2019-10-01 09:54:14, Error CBS Failed to process single phase execution. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]

2019-10-01 11:30:14:594
4052 1148
Handler FATAL: CBS called Error with 0x80070002,
2019-10-01 11:35:22:516
976 3dc
Agent WARNING: WU client fails CClientCallRecorder::RemoveService with error 0x80248014
2019-10-01 11:35:22:518
1164 16a8
COMAPI WARNING: ISusInternal::RemoveService failed, hr=80248014

2019-10-02 10:12:54:573
976 3c0
Report REPORT EVENT: {D62AD5E5-1420-4F1B-8FF4-721F8F4314D7}
2019-10-02 10:07:43:067+0200 1
182 101
{1F74C5CC-0F12-40E5-A947-81516A1CCE12} 200 80070002 AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070002: 2018-11 Security Monthly Quality Rollup for Windows Server 2008 R2 for x64-based Systems (KB4467107).

2019-10-02 13:26:35:268
976 10c
Report REPORT EVENT: {1D8D980C-EFB2-4046-A314-4232F6B256BE}
2019-10-02 13:23:52:032+0200 1
182 101
{82BF6959-36FF-4D3E-A909-B1CF9FFC9880} 201 80070002 AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070002: 2019-08 Security Monthly Quality Rollup for Windows Server 2008 R2 for x64-based Systems (KB4512506).

2019-10-02 19:40:46:024
968 11c4
PT WARNING: Exceeded max server round trips: 0x80244010

2019-10-02 19:40:46:024
968 11c4
Agent WARNING: WU client failed Searching for update with error 0x80244010

2019-10-03 04:05:19:515
976 1a70
Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\bd8fb065-c575-451c-86a0-7fc7f2c0f0bc\Source.cab with dwProvFlags 0x00000080:
2019-10-03 04:09:22:766
976 11f0
Agent WARNING: Failed to evaluate Installable rule, updateId = {C646D973-56DD-480C-83CD-4CFE066B2FEA}.201, hr = 80070663
2019-10-03 04:09:38:876
976 11f0
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2019-10-03 04:09:38:876
976 11f0
PT + Offline serviceId = {BD8FB065-C575-451C-86A0-7FC7F2C0F0BC}
2019-10-03 04:10:18:048
976 11f0
OfflSnc WARNING: Failed to add file to the FileLocationList with 0x80240013
2019-10-03 04:10:18:517
976 11f0
Agent Bundle contains no deployed children and thus is invalid.
2019-10-03 04:10:18:517
976 11f0
Agent Update {7E7049E7-B870-4C87-AF60-BC5A0BACE002}.201 is not a valid bundle. Not returning it.
2019-10-03 04:10:18:517
976 11f0
Agent Bundle contains no deployed children and thus is invalid.
2019-10-03 04:10:18:517
976 11f0
Agent Update {393D97F5-B447-43C5-9E0C-B6707C8D29CE}.201 is not a valid bundle. Not returning it.

2019-10-03 09:36:21, Error DISM DISM Package Manager: PID=5888 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x80070002)
2019-10-03 09:36:21, Error DISM DISM Package Manager: PID=5888 Failed processing package changes - CDISMPackageManager::ProcessChanges(hr:0x80070002)
2019-10-03 09:36:21, Info DISM DISM Package Manager: PID=5888 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2019-10-03 09:36:21, Error DISM DISM Package Manager: PID=5888 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2019-10-03 09:36:21, Info DISM DISM Package Manager: PID=5888 Further logs for online package and feature related operations can be found at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
2019-10-03 09:36:21, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002

2019-10-03 09:44:48, Error DISM DISM Package Manager: PID=6220 Failed finalizing changes. - CDISMPackageManager::Internal_Finalize(hr:0x80070002)
2019-10-03 09:44:48, Error DISM DISM Package Manager: PID=6220 Failed processing package changes - CDISMPackageManager::ProcessChanges(hr:0x80070002)
2019-10-03 09:44:48, Info DISM DISM Package Manager: PID=6220 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2019-10-03 09:44:48, Error DISM DISM Package Manager: PID=6220 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2019-10-03 09:44:48, Info DISM DISM Package Manager: PID=6220 Further logs for online package and feature related operations can be found at %WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
2019-10-03 09:44:48, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002

2019-10-03 09:44:48, Error CBS Failed to perform operation. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]

↧

Win10 Servicing Stack updates with WSUS

May 22, 2019, 9:58 am

≫ Next: The WSUS administration console was unable to connect to the WSUS Server via the remote API.

≪ Previous: error 0x80070002 and/or 0x80070020 on several Server 2008 R2 with update KB4467107 failing and preventing newer updates to succeed

I have several clients I manage for Windows Updates using WSUS. The problem seems to be with Windows 10 workstations. Most of them are on v.1809. Now that Servicing Stack updates are downloaded along with other security updates, I've been approving them at the same time. My issue is that on many of my clients' Windows 10 1809 workstations, the servicing stack updates fail to install. The workstations get stuck downloading the update at 0% and then eventually it fails. At one client I checked recently, this happened on every single workstation with the current (May) updates.

I've Googled this issue but can't seem to find any relevant posts. I'd be glad to just stop approving them but I'm reading that eventually this could cause problems installing future regular updates. Any helpful advice would be appreciated.

Deb

↧

The WSUS administration console was unable to connect to the WSUS Server via the remote API.

November 26, 2018, 9:32 am

≫ Next: 4 of latest updates fail to download with status "The update failed to download":

≪ Previous: Win10 Servicing Stack updates with WSUS

I am receiving the bellow error on my WSUS 2016 Enterprise server patch version 1803.

I have tried to fix this, using the additional memory method, cleaning up the DB, changing the .net version etc..

Still does not work correctly, it seems to be fine, then bam, just freezes with the below error, which requires a server reboot to clear. I have attempted IISReset, and also restarting the WWW publishing services, to no avail.

I have also rebuilt the server twice, thinking that would help, first rebuild was from 2012R2 where this occurred, to 2016 1607 version with the original DB details,.. Same error eventually.. Then a fresh rebuild with a new server name.. same issue occurs.. I have googled this and it appears common yet no one has yet to fix it..

The WSUS administration console was unable to connect to the WSUS Server via the remote API. Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service. System.Net.WebException -- The request failed with HTTP status 503: Service Unavailable. Source System.Web.Services Stack Trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.UpdateServices.Internal.ApiRemoting.ExecuteSPGetConfiguration() at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetConfiguration() at Microsoft.UpdateServices.Internal.BaseApi.UpdateServerConfiguration.Load() at Microsoft.UpdateServices.Internal.ClassFactory.CreateWellKnownType(Type type, Object[] args) at Microsoft.UpdateServices.Internal.ClassFactory.CreateInstance(Type type, Object[] args) at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetConfiguration() at Microsoft.UpdateServices.UI.AdminApiAccess.CachedObject.RefreshCache() at Microsoft.UpdateServices.UI.AdminApiAccess.CachedObject.GetFromCache() at Microsoft.UpdateServices.UI.AdminApiAccess.PermissionsManager.IsPermitted(UserOperation operation) at Microsoft.UpdateServices.UI.SnapIn.Scope.UpdatesSummaryScopeNode.RefreshPermissions() at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.AddChildNodes() at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole) at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ResetScopeNode()

Rob

↧

4 of latest updates fail to download with status "The update failed to download":

November 15, 2019, 7:30 am

≫ Next: Security Monthly Quality Rollup patches not installing on the Servers

≪ Previous: The WSUS administration console was unable to connect to the WSUS Server via the remote API.

We are running Server 2012R2 and W10.

WSUS is mostly working fine and has downloaded most of the last batch of files without problem however there are four that are marked "The update failed to download":

2019-11 CU for W10 1809 (KB4523205) and 1903 (KB4524570)

2019-11 SSU for W10 1809 (KB4523204) and 1903 (KB4524569)

Other files download OK.

There are event log entries such as:

Content file download failed.

Reason: HTTP status 403: The client does not have sufficient access rights to the requested server object.

Source File: /filestreamingservice/files/4d1472e2-297a-42a9-b658-a172787be72b/public/windows10.0-kb4524569-x64_72c34125e50af4c16828d2688dc33dbc2af1b5f4.cab

Destination File: E:\WSUS\WsusContent\F4\72C34125E50AF4C16828D2688DC33DBC2AF1B5F4.cab

What is happening here - is it just a case of waiting and it will sort itself out as all other files have downloaded OK?

Thanks,

Julian

↧

Security Monthly Quality Rollup patches not installing on the Servers

November 15, 2019, 7:48 am

≫ Next: Strange SSL problem

≪ Previous: 4 of latest updates fail to download with status "The update failed to download":

Hi,

In our Monthly patching we have troubling to install Security Monthly Quality Rollup patches on Windows server 2012 R2.

Some severs getting keep failed to install ecurity Monthly Quality Rollup patches.

For Example last month patches KB4520005 failed like we have last 4 months patches.

Error code which we getting is 0X800F0831 in SCCM console.

we have installed latest servicing patches to this machines and all back troubleshooting link system file corruption, Rename software distribution folder, manual installation everything got unsuccessful.

Thanks,

Mohanbabu

↧

Strange SSL problem

July 29, 2019, 3:08 am

≫ Next: WSUS is no longer doing updates after forcing Windows 1909

≪ Previous: Security Monthly Quality Rollup patches not installing on the Servers

Hi,

We had WSUS on Windows Server 2016 some weeks ago with SSL which working fine.

We have reinstalled our server from scratch recently.

The only difference is that domain server name is not the FQDN used to access it (and used by SSL too).

Clients can connect to the server without error. WSUS console says that SSL certificate can't be verified.

All necessary config (wsusutil, iis) has been done.

The certificate is a commercial and fully recognized certificate (but we have imported CA root just in case).

The event log says error 12012 (API not functionning).

As the certificate is ok, we can't understand why console is not running.

I've tried accessing WSUS using Url https://FQDN:8531/WSUSAdmin, but I've got a blank page. Perhaps it's an error 500, but where can I find the logs ?

Have you some idea about this strange thing ?

Thanks for your help

↧

WSUS is no longer doing updates after forcing Windows 1909

November 17, 2019, 1:03 pm

≫ Next: Import WSUS approval to security offline environmet

≪ Previous: Strange SSL problem

I was asked to post here to inquire if anyone knows why or has a solution.

Bottom line is WSUS via AJ Tek script no longer works.

All I did was download the actual Windows update, manually installed it on each PC, then after day 1 with no anything I then downloaded and applied the Administrative Templates (.admx) for Windows 10 November 2019 Update (1909) at https://www.microsoft.com/en-us/download/100591 and applied it to Server.

However, since then, zero WSUS results via the AJ Tek paid script.

Adam said to post here for any solutions.

Content of my support ticked is below, real identity of domain and server has been renamed for privacy.

------------------------------------------------

Adam J. Marshall wrote:

This is outside the scope of support as it doesn't relate to the WSUS Automated Maintenance product itself.

Please create a new thread on Spiceworks (https://community.spiceworks.com/) and tag me +Adam (AJ Tek) or create a new thread on TechNet (https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus). Both communities are great and will help.

Verify that the products are selected properly for WSUS

---

Adam Marshall, MCSE: Security & Microsoft MVP

President

AJ Tek

https://www.ajtek.ca/support/?page=tickets§ion=ticket-list&action=open-ticket&id=1361

On 2019/11/17 09:07:41, guruuno wrote:

Nothing, nada. Ever since 1909.

1909 was not being made available/pushed, so I manually ran the update on each machine.

However, since then there is not even any "definition" (Windows Defender) updates, which are normally multiple.

Below is the output for 2 days.

Any insight as to why/what?

Today, I even ran this, no change:

Administrative Templates (.admx) for Windows 10 November 2019 Update (1909)

https://www.microsoft.com/en-us/download/100591

==================

################################

WSUS Automated Maintenance

Version 2019.07

AJ Tek Corporation

################################

Connected to the WSUS server customerserver.customerdomain.local @ 2019.11.16 07:00:05 AM -05:00

Remove Obsolete Updates:

Changed database context to 'SUSDB'.

2019-11-16 07:00:08 1/5: Deleted 872196 (00:00:01)

2019-11-16 07:00:08 2/5: Deleted 871904 (00:00:00)

2019-11-16 07:00:08 3/5: Deleted 871453 (00:00:00)

2019-11-16 07:00:09 4/5: Deleted 871102 (00:00:01)

2019-11-16 07:00:09 5/5: Deleted 870795 (00:00:00)

Remove Obsolete Updates Stream Duration: 00:00:00:03

Compress Update Revisions:

Changed database context to 'SUSDB'.

Compress Update Revisions Stream Duration: 00:00:00:00

Decline Multiple Types of Updates:

There are 308 updates in this server's database.

There are 16 types of updates that we're going to deal with:

Superseded (Monthly): 9 Expired (Monthly): 0 Preview (Daily): Displaying the titles of the Preview updates that have been declined: Preview has no updates to decline. Itanium (Monthly): 0 LanguagePacks (Monthly): 0 IE7 (Monthly): 0 IE8 (Monthly): 0 IE9 (Monthly): 0 IE10: Skipped Beta (Daily): Displaying the titles of the Beta updates that have been declined: Beta has no updates to decline. Embedded: Skipped NonEnglishUpdates (Monthly): 0 ARM64 (Monthly): 4 ComputerUpdates32bit (Monthly): 4 WinXP (Monthly): 0 SharepointUpdates: Skipped

Decline Multiple Types of Updates Stream Duration: 00:00:00:00

Remove Synchronization Logs:

Changed database context to 'SUSDB'.

(2 rows affected)

Remove Synchronization Logs Stream Duration: 00:00:00:00

Remove Computer Objects:

There are no computer objects to be removed.

Remove Computer Objects Stream Duration: 00:00:00:00

Rename OS Descriptions:

Changed database context to 'SUSDB'.

ComputerName Old_OS_Description New_OS_Description

------------------------------ ------------------------------ ------------------------------

bryan-pc.customerdomain.local NULL NULL

jeff.customerdomain.local NULL NULL

ane.customerdomain.local NULL NULL

flo.customerdomain.local NULL NULL

larry.customerdomain.local NULL NULL

joshsoptiplex.mintzgeftic.loca NULL NULL

sandrapc.customerdomain.local NULL NULL

nancypc.customerdomain.local NULL NULL

martypc.customerdomain.local NULL NULL

Rename OS Descriptions Stream Duration: 00:00:00:00

Database Maintenance:

The Database Maintenance stream was run without the detailed output.

Database Maintenance Stream Duration: 00:00:00:11

Server Cleanup Wizard (SCW):

customerserver.customerdomain.local

Version:

10.0.14393.2969

SupersededUpdatesDeclined:

ExpiredUpdatesDeclined:

ObsoleteUpdatesDeleted:

UpdatesCompressed:

ObsoleteComputersDeleted:

DiskSpaceFreed (MB):

DiskSpaceFreed (GB):

SCW Stream Duration:

00:00:00:15

WSUS Automated Maintenance Duration: 00:00:00:35

################################

Thank you for using WAM!

AJ Tek Corporation

https://www.ajtek.ca/

################################

===========================

################################

WSUS Automated Maintenance

Version 2019.07

AJ Tek Corporation

################################

Connected to the WSUS server customerserver.customerdomain.local @ 2019.11.17 07:00:04 AM -05:00

Remove Obsolete Updates:

Changed database context to 'SUSDB'.

2019-11-17 07:00:06 1/12: Deleted 873017 (00:00:01)

2019-11-17 07:00:06 2/12: Deleted 872818 (00:00:00)

2019-11-17 07:00:07 3/12: Deleted 872514 (00:00:01)

2019-11-17 07:00:07 4/12: Deleted 872112 (00:00:00)

2019-11-17 07:00:07 5/12: Deleted 872008 (00:00:00)

2019-11-17 07:00:08 6/12: Deleted 871701 (00:00:01)

2019-11-17 07:00:08 7/12: Deleted 871577 (00:00:00)

2019-11-17 07:00:08 8/12: Deleted 870374 (00:00:00)

2019-11-17 07:00:08 9/12: Deleted 870272 (00:00:00)

2019-11-17 07:00:08 10/12: Deleted 870270 (00:00:00)

2019-11-17 07:00:08 11/12: Deleted 855422 (00:00:00)

2019-11-17 07:00:08 12/12: Deleted 851682 (00:00:00)

Remove Obsolete Updates Stream Duration: 00:00:00:03

Compress Update Revisions:

Changed database context to 'SUSDB'.

Compress Update Revisions Stream Duration: 00:00:00:00

Decline Multiple Types of Updates:

There are 296 updates in this server's database.

There are 16 types of updates that we're going to deal with:

Decline Multiple Types of Updates Stream Duration: 00:00:00:00

Remove Synchronization Logs:

Changed database context to 'SUSDB'.

(2 rows affected)

Remove Synchronization Logs Stream Duration: 00:00:00:00

Remove Computer Objects:

There are no computer objects to be removed.

Remove Computer Objects Stream Duration: 00:00:00:00

Rename OS Descriptions:

Changed database context to 'SUSDB'.

ComputerName Old_OS_Description New_OS_Description

------------------------------ ------------------------------ ------------------------------

bryan-pc.customerdomain.local NULL NULL

jeff.customerdomain.local NULL NULL

ane.customerdomain.local NULL NULL

flo.customerdomain.local NULL NULL

larry.customerdomain.local NULL NULL

joshsoptiplex.mintzgeftic.loca NULL NULL

sandrapc.customerdomain.local NULL NULL

nancypc.customerdomain.local NULL NULL

martypc.customerdomain.local NULL NULL

Rename OS Descriptions Stream Duration: 00:00:00:00

Database Maintenance:

The Database Maintenance stream was run without the detailed output.

Database Maintenance Stream Duration: 00:00:00:12

Server Cleanup Wizard (SCW):

customerserver.customerdomain.local

Version:

10.0.14393.2969

SupersededUpdatesDeclined:

ExpiredUpdatesDeclined:

ObsoleteUpdatesDeleted:

UpdatesCompressed:

ObsoleteComputersDeleted:

DiskSpaceFreed (MB):

DiskSpaceFreed (GB):

SCW Stream Duration:

00:00:00:14

WSUS Automated Maintenance Duration: 00:00:00:34

################################

Thank you for using WAM!

AJ Tek Corporation

https://www.ajtek.ca/

################################

↧

Import WSUS approval to security offline environmet

November 12, 2019, 4:09 am

≫ Next: 1909 for Server 2019 currently rolled out..?

≪ Previous: WSUS is no longer doing updates after forcing Windows 1909

Hi there,

I have a problem with a WSUS Solution on Windows Server 2019. We have one online WSUS with Internet connections.

One Offline WSUS in Site A and one Replica WSUS in site B as a Test environment without Internet connection.

The Productive WSUS is also one at site A and one on site B but without network connection to the test environment.

With the online WSUS we get the Microsoft updates and copy all include the wsusutil export metadata and the WsusContent Folder to the Test WSUS on site A. Here we do the approvals. WSUS on site B is configured as a replica, this works fine. After the Test we will Copy the WsusContent folder the exported metadate (with wsusutil) and the APPROVALS to the productive environment.

I could not find a solution to export and import the APPROVALS from the Test to the Productive WSUS Server. We Use Windows Server 2019.

Did you guys have any idear

THX Gerd

Herzlichen Dank

↧

1909 for Server 2019 currently rolled out..?

November 18, 2019, 4:37 am

≫ Next: Check WSUS Client Status by Powershell

≪ Previous: Import WSUS approval to security offline environmet

Hello,

We have enabled 1903 updates for Win 10 in WSUS and also tried to update via internet but all our 2019 servers still yell 'You're up to date' ...

Are we missing something or do we just need some patience...?

Thanks for comments

↧

Check WSUS Client Status by Powershell

November 18, 2019, 7:07 am

≫ Next: The server certificate did not comply with the following policy: WindowsUpdateCertificatePolicy

≪ Previous: 1909 for Server 2019 currently rolled out..?

We have 2k12 r2 WSUS server

While We after doing patching i need check status of every server manually on WSUS console for Specific group.

It Easy when All patches are approve then its show Client 100 % Complaint.

But some time some patches are not approve that make very long process to check every client manually in update needed. it will take time.

i need smart way in the could please help me with so i can check specific group client status i.e i need only check all client approve patches status it reboot pending or installed.

i did some search. is below command will work or in need something else please help me. // abc is group name

Get-WsusComputer -ComputerTargetGroups abc -ComputerUpdateStatus FailedOrNeeded -IncludeDownstreamComputerTargets InstalledPendingReboot,Downloaded,installed,Failed -Approval approve

regards

iliyas momin

↧

The server certificate did not comply with the following policy: WindowsUpdateCertificatePolicy

March 5, 2018, 2:19 am

≫ Next: Wsus transfer from online server to offline - problems

≪ Previous: Check WSUS Client Status by Powershell

Please explain me this WSUS error:

ErrorWsusService.20ServerCertificateValidator.VerifyServerCertificate
The server certificate did not comply with the following policy: WindowsUpdateCertificatePolicy

in Microsoft.UpdateServices.Internal.ServerCertificateValidator.VerifyServerCertificate(Object sender, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors)

I can not find any description. What WSUS certificate must have to comply with WindowsUpdateCertificatePolicy? Where are any description about WSUS WindowsUpdateCertificatePolicy?

Thank you

↧

Wsus transfer from online server to offline - problems

April 7, 2018, 1:44 pm

≫ Next: WSUS showing bad build and CU numbers

≪ Previous: The server certificate did not comply with the following policy: WindowsUpdateCertificatePolicy

Hello all,
at the beginning I apologize for my poor English.
I have two WSUS servers on W2k16, one with internet access (online), the other in a network separated from the internet (offline). Both servers updated, build the same 10.0.14393.2155. I regularly download patches on the server with access to the Internet. Then I use Windows Server Backup to copy the content, execute with the command wsusutil.exe export xml.gz and log, move all to the offline server. There again, Windows Server Backup for recovery, and the wsusutil.exe import command.

I have a problem with the offline server. After accepting the patches, the server starts downloading. But at some point the download stops, the server reports that it needs some files. I check in the logs is error 404 server is looking for files that are not there. I check the path carefully and in fact there are no such files. I go to the server with access to the internet which is the source for him and there are actually no files in the given location, but he does not notify me that he needs some files.

Since I use the Windows Server Backup tool and theoretically copy the content 1: 1 and exports the database and then everything import on the server offline why this happens? Do I do something wrong? Is there any procedure how give updates to Wsus servers without access to the Internet?Maybe this is a matter of incorrect configuration? On the offline server (it is set as primary) as the source of patches we have selected not Microsoft Update but alone on itself (a setting called update source and proxy server).

↧

WSUS showing bad build and CU numbers

November 19, 2019, 3:46 am

≫ Next: Windows Update Error 0x80070057 - Windows 10 Pro 1903

≪ Previous: Wsus transfer from online server to offline - problems

First i have noticed this with 1909 version of Windows 10 after i have installed Enablement Package update on one test 1903 PC. It should report 18363 build (like it does via winver), but it shows 18362.

Then i have noticed that it also reports wrong CU number after the dot. Now it shows .449 for both 1903 and 1909 machines, but they are already on .476.

↧

Windows Update Error 0x80070057 - Windows 10 Pro 1903

November 19, 2019, 4:59 am

≫ Next: WSUS 2019 Update Problem.

≪ Previous: WSUS showing bad build and CU numbers

Hi Guys. I've been struggling to resolve a Windows update issue affecting 100's of Windows 10 machines running version 1903 for some time with no luck... We are using WSUS 10.0.14393.2969 on Windows 2016.

What I'm seeing on the client machines is:

There were problems installing some updates, but we'll try again later.
2019-09 Cumulative Update for .NET Framework 3.5 and 4.8 for Windows 10 Version 1903 for x64 (KB4514359) -Error 0x80070057
2019-09 Security Update for Adobe Flash Player for Windows 10 Version 1903 for x64-based Systems (KB4516115) -Error 0x80070057
2019-11 Cumulative Update for Windows 10 Version 1903 for x64-based Systems (KB4524570) -Error 0x80070057
2019-11 Servicing Stack Update for Windows 10 Version 1903 for x64-based Systems (KB4524569) -Error 0x80070057

The corresponding wuetl.log shows errors as follows:

2019/11/19 11:14:46.7408537 6940 7144 DownloadManager * START * Begin Downloading Updates [CallerId = UpdateOrchestrator] [Call ID = {913F56DF-0776-41E0-8FFB-E311BB0812E2}]
2019/11/19 11:14:46.7408615 6940 7144 DownloadManager Priority = 3, NetworkCostPolicy = 0, Interactive = 1, Download on Battery = 1, Bypass Regulation = 1, Owner is system = 1, Proxy session id = 1, ServiceId = 3DA21691-E39D-4DA6-8A4B-B43877BCB1B7.
2019/11/19 11:14:46.7408633 6940 7144 DownloadManager Updates to download = 1
2019/11/19 11:14:46.7408667 6940 7144 Agent Title = 2019-09 Security Update for Adobe Flash Player for Windows 10 Version 1903 for x64-based Systems (KB4516115)
2019/11/19 11:14:46.7408711 6940 7144 Agent UpdateId = AB7DE211-6754-4207-B166-708A59E42C24.200
2019/11/19 11:14:46.7408722 6940 7144 Agent Bundles 1 updates:
2019/11/19 11:14:46.7408759 6940 7144 Agent AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C.200
2019/11/19 11:14:46.7409319 6940 7144 DownloadManager No locked revisions found for update AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C.200 (SessionData = (null)); locking the user-specified revision.
2019/11/19 11:14:46.7412183 6940 7148 DownloadManager *FAILED* [80070057] Error occurred while downloading update 5EEB98CF-4531-4FD7-9C24-8EC7A084AE6F.200; notifying dependent calls.
2019/11/19 11:14:46.7726672 6940 7144 DownloadManager Queueing update AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C.200 for download handler request generation.
2019/11/19 11:14:46.7741041 6940 7144 Handler Loaded state: cCompleteIterations: 0, pt: Unknown, nNextRequestID: 0.
2019/11/19 11:14:46.8115038 6940 7144 Agent Effective power state: AC; IsOnAC: Yes.
2019/11/19 11:14:46.8115135 6940 7144 IdleTimer WU operation (DL.UpdateOrchestrator, operation # 54) stopped; does use network; is not at background priority
2019/11/19 11:14:46.8115182 6940 7144 Agent Released network PDC reference for callId {913F56DF-0776-41E0-8FFB-E311BB0812E2}; ActivationID: 54
2019/11/19 11:14:46.8115278 6940 7144 IdleTimer WU operation (DL.UpdateOrchestrator) started; operation # 55; does use network; is not at background priority
2019/11/19 11:14:46.8115329 6940 7144 Agent Obtained a network PDC reference for callID {913F56DF-0776-41E0-8FFB-E311BB0812E2} with No-Progress-Timeout set to 4294967295; ActivationID: 55.
2019/11/19 11:14:46.8115421 6940 7144 DownloadManager * END * Download Call Complete. Call 6 for caller UpdateOrchestrator has completed; signaling completion.
2019/11/19 11:14:46.8119116 6940 12012 Agent WU client calls back to download call {913F56DF-0776-41E0-8FFB-E311BB0812E2} with code Call progress and error 0
2019/11/19 11:14:46.8123422 6940 7144 Agent Effective power state: AC; IsOnAC: Yes.
2019/11/19 11:14:46.8123509 6940 7144 IdleTimer WU operation (DL.UpdateOrchestrator, operation # 53) stopped; does use network; is not at background priority
2019/11/19 11:14:46.8123550 6940 7144 Agent Released network PDC reference for callId {3D2428CD-D14B-4016-AFD9-43BC0CD56078}; ActivationID: 53
2019/11/19 11:14:46.8129793 12220 12256 ComApi *RESUMED* Download ClientId = UpdateOrchestrator
2019/11/19 11:14:46.8129850 12220 12256 ComApi Download call complete (succeeded = 0, succeeded with errors = 0, failed = 1, cancelled = 0, unaccounted = 0)
2019/11/19 11:14:46.8130070 12220 12256 ComApi ClientId = UpdateOrchestrator: Exit code = 0x00000000; Call error code = 0x80240022
2019/11/19 11:14:46.8130845 12220 12256 ComApi * END * Download ClientId = UpdateOrchestrator
2019/11/19 11:14:46.8131207 6940 12012 Agent WU client calls back to download call {3D2428CD-D14B-4016-AFD9-43BC0CD56078} with code Call complete and error 0x80070057
2019/11/19 11:14:46.8135080 6940 7144 DownloadManager * END * Begin Downloading Updates [CallerId = UpdateOrchestrator] [Call ID = {913F56DF-0776-41E0-8FFB-E311BB0812E2}] [hr = 0x00000000]
2019/11/19 11:14:46.8135121 12220 1300 ComApi Download call complete (succeeded = 0, succeeded with errors = 0, failed = 1, cancelled = 0, unaccounted = 0)
2019/11/19 11:14:46.8135198 12220 1300 ComApi * END * All federated downloads have completed. ClientId = UpdateOrchestrator (cV = cuWy0hDQXE6z306T.1.1)
2019/11/19 11:14:46.8135422 6940 7148 Handler Loaded state: cCompleteIterations: 0, pt: SelfContainedNoExpressPayload, nNextRequestID: 1.
2019/11/19 11:14:46.8135527 6940 7144 Agent Effective power state: AC; IsOnAC: Yes.
2019/11/19 11:14:46.8135648 6940 7144 IdleTimer WU operation (DL.UpdateOrchestrator) started; operation # 57; does use network; is not at background priority
2019/11/19 11:14:46.8135701 6940 7144 Agent Obtained a network PDC reference for callID {1B242816-1944-4D90-8F34-AB54279C5735} with No-Progress-Timeout set to 4294967295; ActivationID: 57.
2019/11/19 11:14:46.8136045 6940 7148 DownloadManager Generating download request for update AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C.200.
2019/11/19 11:14:46.8146630 6940 7148 Misc *FAILED* [80070003] Method failed [SusMoveOrCopyDirectoryContentsHelperRecursive:1650]
2019/11/19 11:14:46.8146671 6940 7148 Misc *FAILED* [80070003] Method failed [SusMoveOrCopyDirectoryContentsHelper:1731]
2019/11/19 11:14:46.8146747 6940 7148 DownloadManager Calling into handler 0x8 to generate download request for update AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C.200.
2019/11/19 11:14:46.8146818 6940 7148 Handler Generating request for CBS update AB11DCBD-AD0E-4CB4-B143-3527DCF2BF7C in sandbox C:\Windows\SoftwareDistribution\Download\54200965aa41c556f4acff41ed855e47
2019/11/19 11:14:46.8147166 6940 7148 Handler Loaded state: cCompleteIterations: 0, pt: Unknown, nNextRequestID: 0.
2019/11/19 11:14:46.8147199 6940 7148 Handler Selecting self-contained because update does not have express payload.
2019/11/19 11:14:46.8147216 6940 7148 Handler Selected payload type is SelfContainedNoExpressPayload
2019/11/19 11:14:46.8147493 6940 7148 Handler Detected download state is dsStart
2019/11/19 11:14:46.8147560 6940 7148 Handler Adding Windows10.0-KB4516115-x64.cab (entire file) to request list.
2019/11/19 11:14:46.8153041 6940 7148 Handler Saved state: cCompleteIterations: 0, pt: SelfContainedNoExpressPayload, nNextRequestID: 1.
2019/11/19 11:14:46.8153093 6940 7148 Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2019/11/19 11:14:46.8166001 6940 7148 DownloadManager *FAILED* [80070057] Method failed [CAgentDownloadManager::EnsureSufficientFreeSpace:23356]
2019/11/19 11:14:46.8166050 6940 7148 DownloadManager *FAILED* [80070057] Method failed [CAgentDownloadManager::HandleUpdateDownloadVolume:23302]
2019/11/19 11:14:46.8166117 6940 7148 DownloadManager *FAILED* [80070057] GDR
2019/11/19 11:14:46.8174621 6940 7148 Handler Loaded state: cCompleteIterations: 0, pt: Unknown, nNextRequestID: 0.

I've tried the usual fixes, i.e. renaming SoftwareDistribution folder, "UxOption"=dword:00000000, "IsConvergedUpdateStackEnabled"=dword:00000000 but with no luck...

The following referenced article suggests that 0x80070057 may be caused by a proxy issue - however for testing purposes I've completely blanked the IE internet proxy settings, and ensured that 'netsh winhttp show proxy' is showing 'direct'...

http://woshub.com/all-windows-update-error-codes/

So with all this said - would somebody be able to provide a clue as to where I should look next?

Thanks, Ash.

↧

WSUS 2019 Update Problem.

November 19, 2019, 7:24 am

≫ Next: WSUS Post-Configuration fails after an upgrade to 2012 R2 (System.Runtime.InteropServices.COMException (0x80070003))

≪ Previous: Windows Update Error 0x80070057 - Windows 10 Pro 1903

Hi Guys,

I have WSUS set up on Windows Server 2019 and have just testing it on client which is Windows Server 2012 R2. I have approved all the superseding needed updates and most of them got installed on the client. But there are few updates which are showing as needed in WSUS Server console but the client is showing no updates are available in windows update. Have run wuauclt /detectnow /reportnow on client and it is reporting under last status report in WSUS. Any help will be appreciated and thanks in advance.

↧

WSUS Post-Configuration fails after an upgrade to 2012 R2 (System.Runtime.InteropServices.COMException (0x80070003))

May 12, 2014, 6:15 am

≫ Next: wsus install failing on Launch Post-Installation Tasks

≪ Previous: WSUS 2019 Update Problem.

Hello.

I recently upgraded my WSUS host (WID) from Server 2012 to 2012R2.

After upgrade is finished I found, that WSUS Post-deployment configuration failed with the following error:

--------

Log file is located at C:\Users\xxx\AppData\Local\Temp\tmp7AA1.tmp
Post install is starting
Fatal Error: The system cannot find the path specified.

--------

I tried to launch postinstall using Powershell and got the same result.

I also checked if UpdateServices-Services.xml is placed in C:\Windows\System32\ServerManager\ComponentConfiguration folder and contains correct path to WSUS files - everything was OK.

There is the full log:

2014-05-12 15:40:17 Postinstall started
2014-05-12 15:40:17 Detected role services: Api, UI, WidDatabase, Services
2014-05-12 15:40:17 Start: LoadSettingsFromParameters
2014-05-12 15:40:17 Content local is: False
2014-05-12 15:40:17 SQL instname is:
2014-05-12 15:40:17 End: LoadSettingsFromParameters
2014-05-12 15:40:18 Start: Run
2014-05-12 15:40:18 Fetching WsusAdministratorsSid from registry store
2014-05-12 15:40:18 Value is S-1-5-21-3606383621-533361507-1611783712-1001
2014-05-12 15:40:18 Fetching WsusReportersSid from registry store
2014-05-12 15:40:18 Value is S-1-5-21-3606383621-533361507-1611783712-1002
2014-05-12 15:40:18 Configuring content directory...
2014-05-12 15:40:18 Configuring groups...
2014-05-12 15:40:18 Starting group configuration for WSUS Administrators...
2014-05-12 15:40:18 Found group in regsitry, attempting to use it...
2014-05-12 15:40:20 Writing group to registry...
2014-05-12 15:40:20 Finished group creation
2014-05-12 15:40:20 Starting group configuration for WSUS Reporters...
2014-05-12 15:40:20 Found group in regsitry, attempting to use it...
2014-05-12 15:40:20 Writing group to registry...
2014-05-12 15:40:20 Finished group creation
2014-05-12 15:40:20 Configuring permissions...
2014-05-12 15:40:20 Fetching content directory...
2014-05-12 15:40:20 Fetching ContentDir from registry store
2014-05-12 15:40:20 Value is D:\WSUS
2014-05-12 15:40:20 Fetching group SIDs...
2014-05-12 15:40:20 Fetching WsusAdministratorsSid from registry store
2014-05-12 15:40:20 Value is S-1-5-21-3606383621-533361507-1611783712-1001
2014-05-12 15:40:20 Fetching WsusReportersSid from registry store
2014-05-12 15:40:20 Value is S-1-5-21-3606383621-533361507-1611783712-1002
2014-05-12 15:40:20 Creating group principals...
2014-05-12 15:40:20 Granting directory permissions...
2014-05-12 15:40:21 Granting permissions on content directory...
2014-05-12 15:41:24 Granting registry permissions...
2014-05-12 15:41:24 Granting registry permissions...
2014-05-12 15:41:24 Granting registry permissions...
2014-05-12 15:41:24 Configuring shares...
2014-05-12 15:41:24 Configuring network shares...
2014-05-12 15:41:24 Fetching content directory...
2014-05-12 15:41:24 Fetching ContentDir from registry store
2014-05-12 15:41:24 Value is D:\WSUS
2014-05-12 15:41:24 Fetching WSUS admin SID...
2014-05-12 15:41:24 Fetching WsusAdministratorsSid from registry store
2014-05-12 15:41:24 Value is S-1-5-21-3606383621-533361507-1611783712-1001
2014-05-12 15:41:24 Content directory is local, creating content shares...
2014-05-12 15:41:24 Creating share "UpdateServicesPackages" with path "D:\WSUS\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications) published on this WSUS system."
2014-05-12 15:41:24 Deleting existing share...
2014-05-12 15:41:24 Creating share...
2014-05-12 15:41:24 Share successfully created
2014-05-12 15:41:24 Creating share "WsusContent" with path "D:\WSUS\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2014-05-12 15:41:24 Deleting existing share...
2014-05-12 15:41:24 Creating share...
2014-05-12 15:41:24 Share successfully created
2014-05-12 15:41:24 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2014-05-12 15:41:24 Deleting existing share...
2014-05-12 15:41:24 Creating share...
2014-05-12 15:41:24 Share successfully created
2014-05-12 15:41:24 Finished creating content shares
2014-05-12 15:41:24 Stopping service WSUSService
2014-05-12 15:41:25 Stopping service W3SVC
2014-05-12 15:41:27 Configuring WID database...
2014-05-12 15:41:27 Configuring the database...
2014-05-12 15:41:27 Establishing DB connection...
2014-05-12 15:41:27 Checking to see if database exists...
2014-05-12 15:41:27 Database exists
2014-05-12 15:41:27 Switching database to single user mode...
2014-05-12 15:41:30 Loading install type query...
2014-05-12 15:41:30 DECLARE @currentDBVersion       int
DECLARE @scriptMajorVersion     int = (9600)
DECLARE @scriptMinorVersion     int = (16384)
DECLARE @databaseMajorVersion   int
DECLARE @databaseMinorVersion   int
DECLARE @databaseBuildNumber    nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
    SELECT 1
END
ELSE
BEGIN
    SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
    IF (@delimiterPosition = 0)
    BEGIN
        RAISERROR('Invalid schema version number', 16, 1) with nowait
        return
    END
    SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
    SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
    IF @currentDBVersion < 926
    BEGIN
        SELECT 3
    END
    ELSE
    BEGIN
        IF (@scriptMajorVersion > @databaseMajorVersion OR
           (@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
        BEGIN
            SELECT 2
        END
        ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
                 @scriptMinorVersion = @databaseMinorVersion)
        BEGIN
            SELECT 0
        END
        ELSE
        BEGIN
            SELECT 4
        END
    END
END

2014-05-12 15:41:31 Install type is: Reinstall
2014-05-12 15:41:31 Creating logins...
2014-05-12 15:41:31 Fetching account info for S-1-5-20
2014-05-12 15:41:31 Found principal
2014-05-12 15:41:31 Found account
2014-05-12 15:41:31 Got binary SID
2014-05-12 15:41:31 Fetching WsusAdministratorsSid from registry store
2014-05-12 15:41:31 Value is S-1-5-21-3606383621-533361507-1611783712-1001
2014-05-12 15:41:31 Fetching account info for S-1-5-21-3606383621-533361507-1611783712-1001
2014-05-12 15:41:33 Found principal
2014-05-12 15:41:33 Found account
2014-05-12 15:41:33 Got binary SID
2014-05-12 15:41:33 Setting content location...
2014-05-12 15:41:33 Fetching ContentDir from registry store
2014-05-12 15:41:33 Value is D:\WSUS
2014-05-12 15:41:33 Swtching DB to multi-user mode......
2014-05-12 15:41:40 Finished setting multi-user mode
2014-05-12 15:41:40 Writing DB settings to registry...
2014-05-12 15:41:40 Marking PostInstall done for UpdateServices-WidDatabase in the registry...
2014-05-12 15:41:40 Starting service W3SVC
2014-05-12 15:41:40 Configuring IIS...
2014-05-12 15:41:40 Start: ConfigureWebsite
2014-05-12 15:41:41 System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the path specified.

   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.UpdateServices.Administration.UseCustomWebSite..ctor()
   at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
   at Microsoft.UpdateServices.Administration.PostInstall.Run()
   at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)

Could anyone please help with this issue?

Thank you.

↧